DSP presets. With a response of 45 Hz –100 Hz ± 3 dB, the SX115 is ideal for use with Martin Audio point source systems (up to 12"), constant curve systems (such as TORUS 8) and line array systems (such as WPM). For crossover and EQ functions for a full-range system, we recommend the DX series controllers (DX0.4, DX0.6 and DX4.0) or the...
SX115 User Guide Wind-up handle for raising speakers to required height ▪ Rugged steel construction ▪ Locking screw and safety button ▪ 35 mm diameter to fit standard portable speaker top- ▪ hat fittings M20 threaded base fitting ▪ Flying grid Product code: SXGRIDI15 ▪...
SX115 User Guide Connections The SX115 has two NL4 sockets on the back panel, labelled INPUT and LINK. Despite the labels, the two sockets are the same, so you can use them either way round. For both sockets, the pins connect as follows: Pins 1+/1–...
SX115 User Guide Fitting castors We supply swivel castors in sets of four with all required Make sure you use the bolts from the kit, not the fittings. The product code for this optional accessory is screws from the cabinet. WHEELKIT (page To fit the castors 1.
To fly individual SX115 subwoofers from ceilings, trusses recommend five eye bolts: four to fly the subwoofer or poles, use Martin Audio M10 shouldered eye bolts (part and one as a redundant safety bond. number HTKCT06) and appropriately rated steel ropes or chains.
SX115 User Guide Flying an array of SX115 To fly an array of SX115 subs, you need the following With a small array, it is easiest to stack the SX115 subs optional accessories: first and attach the fittings, as explained in the next section.
SX115 User Guide To fly an array of SX115 Each flying strip overlaps the flying strip on the cabinet above, so you may find it easiest to attach 1. Remove the M10 bolts from the sides of the cabinets, the strips from the bottom of the array. four from each side.
SX115 User Guide 3. Place the SXGRIDI15 on top of the array. 5. Attach a hoist and raise the array into the air. To add subs to the array 1. Use a hoist to raise an array (or a single sub) into the air as described in the previous section.
SX115 User Guide Flying SX115 above WPM To fly an array of SX115 above WPM, you need the following optional accessories: One SXGRIDI15 flying frame for the top of the array. ▪ One FKIT450 flying kit for each SX115 sub. ▪...
SX115 User Guide Flying SX115 above Torus T8 To fly an array of SX115 above Torus T8, you need the following optional accessories: One SXGRIDI15 flying frame for the top of the array. ▪ One FKIT450 flying kit for each SX115 sub. ▪...
The SX115 has an M20 top-mounted thread plate for 2. Screw the threaded pole into the M20 plate until installing a pole. secure. The Martin Audio wind-up telescopic pole ASF20071 (page 4) supports speakers with a top hat fitting up to 35 kg (77.2 lbs), such as CDD-LIVE, XD, WPM and MLA Mini.
SX115 User Guide System controllers For system controllers, we recommend the Martin Audio DX0.4 or DX0.6, or for larger installations the DX4.0. If you are using an iKON amplifier, you don't need a system controller as these amplifiers have on-board system processing.
System design To design your system and decide on the best positions To download the Revit family for speakers and subs, we recommend Martin Audio 1. Visit our website martin-audio.com. Display 3 software, which we provide as a free download from our website.
SX115 User Guide Other SX subwoofers The SX Series subwoofers are a range of sub bass The range includes two powered, Dante equipped enclosures designed to complement Martin Audio full subwoofers. These are an ideal partner for CDD‑LIVE. The range systems. The range encompasses installation and...
SX115 User Guide SX115 specification Type Direct radiating subwoofer Frequency 45 Hz – 100 Hz ± 3 dB, –10 dB @ 36 Hz response Drivers LF: 15” with 4” voice coil, ferrite motor system Rated power 800 W AES, 3,200 W peak Recommended iK41 amplifier...
SX115 User Guide SX115 technical drawing The drawing below shows the SX115 with the optional To load this drawing into CAD software, see castors fitted. files (page 16).
Check the sound quality with headphones at the amplifier or preamp. Technical support For technical support, contact either your supplier or ▪ Martin Audio technical support. For Martin Audio technical support, go to our website ▪ martin-audio.com and select Support > Support Contacts. Service For service details, go to our website martin-audio.com...
Page 21
+1 323 381 5310 www.martin-audio.com Martin Audio, the Martin Audio logo and Hybrid are registered trademarks of Martin Audio Ltd. in the United Kingdom, United States and other countries; all other Martin Audio trademarks are the property of Martin Audio Ltd.
Need help?
Do you have a question about the SX Series and is the answer not in the manual?
Questions and answers