Sencor SRD 3200 User Manual page 5

USB, MICRO SD CARD PLAYBACK
MICRO SD Card Slot.
1. Select USB or SD.
2. Before connecting the USB media to the unit, make sure the port is in correct direction and will
connect. Or insert MICRO SD Card straightly without bending.
3.
Card.
4. Press PREVIOUS / PLAY PAUSE / NEXT buttons for Previous / Play & Pause / Next functions.
Wrongly connect the USB Storage Media or MICRO SD Card upside down could damage the
unit or the USB Storage Media or MICRO SD Card. A locked MICRO SD Card cannot be detected
or playback.
BLUETOOTH FUNCTION
1. Switch on the unit, press MODE
2. Activate the Bluetooth function in your Bluetooth device.
3. Select "SRD 3200" on your Bluetooth device for pairing. The speakers will have a pop sound to
4. Start music play on your Bluetooth device.
After connected, you can control the playback, pause, next, previous function by both yout
Bluetooth device or the unit directly.
5. Press PROG button for 3 second to disconnect the pairing of Bluetooth function. The Bluetooth
Tips:
The device will be disconnected when the device is moved beyond the operational range. If you want
to reconnect the device to the unit, place it within the operational range.
Note:
The operational range between this unit and a Bluetooth device is approximately 10 meters. Any
obstacle between this unit and a Bluetooth device can reduce the operational range.
Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of
the device. Compatibility with all Bluetooth devices is not guaranteed.
Keep this unit away from any other electronic device that may cause interference.
Speaker:
Power Output:
AC Operate:
DC Operate:
Automatic standby time:
is pressed for a certain period of time under certain operating conditions. If this function is disabled,
power consumption will increase.
SPECIFICATIONS
3 inches, 8 ohm dynamic speaker
1.2W
230V ~ 50Hz
DC 4.5V Battery (3 x 1.5V "R14 / UM-2 / C")
1 min
EN - 5