Page 1
SRD 220 INSTRUCTION MANUAL PORTABLE PLL FM RADIO WITH USB/MICROSD PLAYER NÁVOD K OBSLUZE PŘENOSNÉ PLL FM RÁDIO S USB/MICROSD PŘEHRÁVAČEM NÁVOD NA OBSLUHU PRENOSNÉ PLL FM RÁDIO S USB/MICROSD PREHRÁVAČOM HASZNÁLATI ÚTMUTATÓ HORDOZHATÓ PLL FM RÁDIÓ USB/MICROSD LEJÁTSZÓVAL INSTRUKCJA OBSŁUGI...
Page 3
CONTENTS CONTROL LOCATION ..........................2 OPERATING INSTRUCTION ........................3 SPECIFICATIONS ...........................6 OPERATING INSTRUCTION ........................7 EN - 1...
CONTROL LOCATION 1. ON / STANDBY 2. FUNCTION / TIMER SET 3. PROGRAM / CLOCK SET / USB PLAY PAUSE BUTTON 4. PRESET – / USB PREVIOUS BUTTON 5. PRESET + / USB NEXT BUTTON 6. VOLUME - 7. VOLUME + 8.
OPERATING INSTRUCTION Battery Supply Open the battery compartment and insert as indicated in the compartment three Batteries, type C. For clock backup, insert three 1.5 V type C batteries into this compartment as shown. Mains Supply Connect the mains lead to the wall socket. The mains Supply is switched on. To disconnect the set from the mains completely, withdraw the mains plug from the wall socket.
Page 6
Radio 1. Press ON / STAND BY to switch on the radio. 2. Press FUNCTION button to listen to radio. In radio mode, the display will show frequency information about the radio station. 4. Select your station by using TUNING + or TUNING – 5.
Page 7
Wrongly connect the USB Storage Media or MICRO SD Card upside down could damage the unit or the USB Storage Media or MICRO SD Card. A locked MICRO SD Card cannot detected or playback. The USB slot supports a USB memory capacity of up to 16 GB. MICRO SD slot supports the max.
SPECIFICATIONS FM range: 87.5 – 108 MHz Speaker: 3.5 inches, 8 Ohm dynamic speaker Power Output: 1 W RMS Battery power supply: DC (3 x 1.5V type C) AC Operate: AC 230 V ~ 50 Hz Consumption: Dimensions: 210 x 138 x 45 mm Weight: 720 g EN - 6...
OPERATING INSTRUCTION 1. For AC operation, make sure the voltage is compatible. Always use the provided AC power cord; never use other AC power cord. For DC operation, simply insert three batteries type C. 2. Always disconnect the AC power cord from the AC power source when it is not in use or when DC power is operating.
Page 10
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Take the packaging material to a designated municipal waste facility. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste.
Page 11
Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged). Authorized service centers Visit www.sencor.eu for detailed information about authorized service centers. EN - 9...