Sleep Function - Sencor SRD 3200 User Manual

SLEEP FUNCTION

1. Press the SLEEP to select a time. For example, when the LED display shows "SL 15". The radio
2. To select a longer playing time, press the SLEEP button to select 15 / 30 / 45 / 60 / 75 / 90
minutes or OFF.
3.
RADIO
1. Press POWER to switch on the radio.
2. Press MODE once or more to select FM waveband.
3. The display shows the radio station details throughout the radio mode.
4. Select your station by using TUNING+ or TUNING–.
5. Adjust the sound with VOLUME+ or VOLUME-.
6. To switch to standby mode, press POWER once.
TUNING
Manual tuning
Press TUNING + or TUNING –
Automatic tuning
1. Press and hold down TUNING + or TUNING –
2.
tuning by pressing TUNING + or TUNING – again.
PRESETS
Automatic Preset
1. Press and hold down PROG
Manual Preset
1. Select your wave band and tune to your desired station (See TUNING).
2. Press PROG once to enter programming mode.
3. Press PRESET + or PRESET – to select the desired memory location.
4. Press PROG
5. To listen to a preset station: press the PRESET + or PRESET – for selecting your desired station.
To improve reception:
For FM, pull out the telescopic aerial. To improve FM Reception incline and turn the aerial, reduce its
length if the FM-signal is too strong (very close to a transmitter).
VOLUME
Adjust the sound with the controls VOLUME + or VOLUME -.
You may connect headphones (not included) to 3.5mm HEADPHONE JACK. The loudspeaker is then
muted.
Avoid listening to headphones at high volume levels to prevent possible hearing damage.
USING THE AUX INPUT
Connect the AUX connect wire from the out jack of your Personal Player such as portable MP3 player
to the AUX input jack.
Turn on your Personal Player to begin playing, adjust the volume to desire listening level.
Adjust the volume by rotating the VOLUME + or VOLUME -.
POWER to standby mode.
EN - 4