CONTROL LOCATION CARRYING HANDLE FREQUENCY TUNING KNOB SPEAKER FREQUENCY SCALE RADIO BAND SELECTOR (AM/FM/OFF) VOLUME CONTROL ROD ANTENNA HEADPHONE JACK AC IN SOCKET 10. BATTERY COMPARTMENT COVER EN - 2...
OPERATING INSTRUCTION POWER SUPPLY AC OPERATION Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the unit, and the other end to the wall outlet. DC (BATTERY) OPERATION 1. To play your unit on batteries, the AC power cord must be disconnected from the unit and Wall outlet.
SPECIFICATIONS Speaker: 3 inches, 8 ohm dynamic speaker Power Output: 1.0W Battery Operate: DC 4.5V (3 × “UM-2 / C“) AC Operate: 230V ~ 50Hz PRECAUTIONS 1. For AC operation, make sure the voltage is compatible. Always use the supplied AC power cord; never use other AC power cord.
Hereby, FAST ČR, a.s. declares that the radio equipment type SRD 2100 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sencor.eu Address of the manufacturer: FAST ČR, a.s., Černokostelecká 1621, Říčany CZ-251 01 The original version is in the Czech language. EN - 5...
Page 6
FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic info@sencor.com Authorized service centers: Visit www.sencor.com for detailed information about authorized service centers. The original version of the instructions is in the Czech language, other language versions are made by the appropriate translation.
Need help?
Do you have a question about the SRD 2100 and is the answer not in the manual?
Questions and answers