luceco LEXSFD50B40P Installation & Operating Instructions

SOLAR SECURITY
FLOODLIGHT
LEXSFD50B40P / LEXSFD100B40P / LEXSFD200B40P / LEXSFD300B40P
1
3
Installation Instruction:
1.
The emitting surface of the light is made of PC and the surface of the solar panel is made of glass. As important structures of lights, both of them are fragile. Please
handle carefully during transportation, handling, storage, and installation. Don't press hard to avoid damaging the inner structure.
2.
This light should be stored in a place with good ventilation and clean environment. The ambient temperature should be between - 10 ° C and 40 ° C. Don't store it in
any icy environment. Please keep away from corrosive substances. Please charge and discharge once a month if it's not used for a long time.
3. Please check the light, first place the solar panel and the light in a place with sufficient sunlight, and connect the connection between light and solar panel. Covering
the solar panel with an opaque material, and then the light will light up, which proves the solar panel can work normally and the battery can also be charged normally.
Maintenance and Repair Notes:
1.
Regularly clean the PC cover and solar panel to maintain good light transmittance.
2.
Regularly clean the dust from light outer shell to maintain good heat dissipation performance.
3.
Don't use water or corrosive solutions to clean the light, please use a dry towel.
4.
Avoid storing and using light in corrosive or harmful substances environments, such as sulfides.
Stafford Park 1, Telford, Shropshire,
Visit our website at
LEXSFDxx.DC.08.2024
Tech Help Line
0330 0249 279
UK -
+44 (0)1952 238 100
Non UK -
Supplied by LUCECO
England, TF3 3BD
www.luceco.com
Installation & Operating Instructions
4000K
NEUTRAL
WHITE
2
4
Servicio de asistencia telefónica
0330 0249 279
UK -
+34 93 829 55 74
Non UK -
(EU) Luceco SE
C/ Bobinadora 1-5
08302 Matarό Spain
Visite nuestra web en
IP65
RATED
INSTALLATION
MOTION
DETECTOR
www.luceco.com
EASY