Table of Contents Features Safety Precautions Product Overview Control Panel Before First Use Operation Guide A. Power on and Preheat B. Brew Single-Cup Espresso C. Preparing Double-Cup Espresso D. Preparing Americano E. Preparing Cappuccino F. Preparing Latte G. Making Hot Water Manual Froth Function Manual Cleaning Empty the Coffee Bean Box...
Features Enjoy a versatile coffee experience with various brewing modes to suit different preferences. Create perfectly frothed milk for cappuccinos and lattes with the automatic frothing function. Maintain your machine effortlessly with an automatic cleaning cycle that keeps it in optimal condition. Easily access hot water for tea, instant coffee, or other hot beverages at the touch of a button.
Page 4
Vigilant supervision is required whenever this appliance is operated in the vicinity of children. Children should not perform cleaning and user maintenance tasks without supervision. To safely disconnect the appliance, turn any controls to the "OFF" position, remove the plug from the wall outlet by holding the plug, not the cord. Unplug the appliance when not in use, before cleaning, and before assembling or disassembling any parts.
Page 5
Certain parts of the appliance can become hot during use—avoid direct contact with skin and use the handles or knobs. The appliance should never be submerged in any liquids to prevent the risk of electric shock. This appliance is suitable for use in household and similar environ- ments, such as: a.
Before First Use Ensure that all accessories are complete and the unit is undamaged. Familiarize yourself with all components and their functions. Retain the original packaging for future storage needs. Proceed as follows: Prior to the initial use, remove and thoroughly rinse the water tank, milk reservoir, brewer, and milk froth maker with clean water.
Page 8
Milk Froth Maker Open the coffee outlet cover to ensure the milk froth maker is correctly installed. If the milk froth maker is securely in place, close the coffee outlet cover and connect it to the connecting tube. Insert the opposite end of the connecting tube into the milk reservoir. Coffee Outlet Height Adjustment The coffee outlet can be adjusted between 85mm and 115mm to accomm- odate different cup sizes.
Insert the drip tray securely into the appliance. Note: The drip tray collects water from the dispensing spout during rinsing and self-cleaning cycles, as well as any coffee spills during brewing. Clean and empty the drip tray daily to maintain cleanliness and efficiency.
Note: For troubleshooting guidance if a warning occurs, please refer to the "TROUBLESHOOTING" section. Position a container beneath the coffee outlet. The Manual Clean indicator " " will illuminate solidly, along with the Power switch indicator " " flashing, indicating that the appliance is in the preheating and auto-clean phases.
Press and hold the Double-cup Espresso button " " for at least 0.2 seconds to initiate brewing. The Double-cup Espresso indicator " " will remain lit throughout the brewing process. Note: The double-cup espresso is achieved by brewing two consecutive cycles of single-cup espresso.
Ensure the milk level does not exceed the "MAX" mark on the milk reservoir. Properly insert the milk tube. Detach the silicone tube from the milk reservoir lid and connect it to the milk froth maker and milk reservoir lid. Press and hold the Cappuccino button "...
Page 13
Note: After the "Latte" function is initiated, the boiler's overheating protection mechanism will activate. If you need to use the "Hot Water" function subsequently, allow the appliance to rest for about 3-5 minutes before activating it. It is recommended to use milk that is stored in temperatures between 5-10°C and contains at least 3 % fat.
Remove the milk reservoir and rinse it thoroughly with tap water. Remove the milk tube and rinse it with tap water. Making Hot Water Place a water container under the coffee outlet. Note: The capacity of the water container should exceed 120ml. Ensure the milk froth maker plug is securely closed.
Once frothing is complete, the appliance will automatically enter standby mode. Press and hold the Manual froth button again for at least 0.1 seconds if you wish to cancel the current function. Notes: After each use, if there is still milk in the milk reservoir, please store it in the refrigerator.
Empty the Coffee Bean Box Note: This function is used for emptying the beans in the bean box. Please use it carefully to avoid waste. Press and hold the Bean-Emptying for at least 1 second, and the appliance will start the bean-emptying function. At this point, the Bean-Emptying indicator will illuminate steadily while other functional indicators turn off.
Power switch for at least 0.2 seconds to reactivate the appliance after more than 4 hours, and the auto-clean function will be triggered. If the appliance is powered off, the auto-clean function will be activated after holding and pressing the Power switch for at least 0.2 seconds.
Factory Reset Function Hold and press the Single-cup Espresso and Double-cup Espresso buttons simultaneously for 2 seconds. All parameters will be restored to the factory default settings. Cleaning and Maintenance Caution: Be sure to unplug this appliance before cleaning and allow it to cool down completely.
Page 19
Detachable part: Brewer When to clean: For Single-cup Espresso, Latte, and Cappuccino, clean once every 8 brewing cycles. For Double-cup Espresso, clean once every 4 brewing cycles. It is recommended to clean it on the same day if it is not used for a long time.
Page 20
coffee from the gap. (4) Clean the grinding chamber with a cleaning brush. (5) Firstly, install the grind setting knob back into position. Then reinstall the grinding part yet. (6) Press the button of the grinder. (7) Let the grinder run to remove any remaining powder in the grinding chamber.
Page 21
If the ground coffee becomes noticeably finer during use or Note: the coffee pack becomes smaller after brewing, please check the powder-dispensing channel for any blockages. The powder-dispensing channel should be cleaned once every week. Non-detachable part: Brewing base When to clean: Check it once a week Cleaning Instructions: Clean the coffee residue around the brewing base with a brush.
Page 22
Clean the brewer Open the door. Remove the brewer. Rinse the brewer under tap water. Reinstall the brewer into the appliance. Close the door, and the cleaning is complete. Clean the water tank Remove the water tank from the coffee machine. Rinse the water tank under tap water.
Page 23
Clean the grinder Remove the grind setting knob by turning it counterclockwise. Remove the internal grinding wheel by turning it counterclockwise. Clean the grinding wheel with a cleaning brush and empty the ground coffee from the gap. Clean the grinding chamber with the cleaning brush. Do not reinstall the grinding wheel yet.
Clean the powder-dispensing channel Method 1: Press and hold the “Bean-emptying” key and “Single-cup Espresso” key simultaneously for 0.2 seconds. Their corres- ponding indicators will flash and the door will open. Open the door and use the cleaning brush to brush off and remove the ground coffee in the powder-dispensing channel, then close the door once the ground coffee falls down.
(1) The number of coffee-brewing cycles will be reset to zero and recounted after a complete descaling is finished. (2) The descaling prompt will reappear when the appliance has brewed 500 cycles of coffee cumulatively. Specifications Lepresso PERFETTO Automatic Espresso Machine with Product Name Milk Frothing System LPCFFM0003-BK Rated Voltage...
Tips A clean coffee machine is essential for making tasty coffee. It is necessary to clean the coffee machine regularly as specified in the " Cleaning and Maintenance" section. Always use fresh, room-temperature water when brewing coffee. Store unused ground coffee in a cool and dry place. After opening a new bag of ground coffee, reseal it tightly and store it in a refrigerator to maintain its freshness.
Page 27
Ensure the brewer or inner drip tray is correctly installed. Please contact the service professionals if the problem cannot be resolved. The No Bean indicator illuminates solidly. Problem 4: Cause: The bean box is empty. Solution: Fill the bean box with coffee beans and then run the coffee machine to brew coffee.
Page 28
The Single-cup Espresso and Warning indicator Problem 8: flash at the same time. Cause: The grinding motor is not functioning normally. Solution: Turn off the appliance and restart it. Please contact the service professionals if the problem cannot be resolved. The No Bean indicator and Warning indicator Problem 9:...
Page 29
Solution: Turn off the appliance and restart it. Please contact the service professionals if the problem cannot be resolved. The cream is not rich. Problem 12: Cause 1: The ground coffee is too coarse. Solution 1: Turn the grind setting knob clockwise to select the proper setting.
Page 30
The brewer cannot be removed. Problem 16: Cause 1: The machine is not turned off correctly. Solution 1: Turn off the machine and then turn it on again to reset the brewer. If the problem persists, please contact authorized service professionals.
Page 31
Always empty the residue-collection container and clean the brewer when the coffee machine is turned on. The counter will not reset if the residue-collection container is emptied or the brewer is cleaned when the coffee machine is turned off. The coffee machine can grind coffee beans, but no Problem 20: coffee is dispensed.
Warranty Products that you buy directly from our LePresso website or shop come with a 24-month warranty. The 24-month warranty applies to products purchased directly from our LePresso website or store. If LePresso products are bought from any of our verified retailers, then the product is eligible for only a 12 -month warranty.
Need help?
Do you have a question about the PERFETTO and is the answer not in the manual?
Questions and answers