Adjusting Setup Items - Set; Using Optional Equipment; Cd/Md Changer - Sony CDX-GT610U Operating Instructions Manual

Tip
Other equalizer types are also adjustable.
With the card remote commander
In step 3, to adjust the selected item, press <, M, ,
or m.
Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example "ON" or
"OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
CLOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set "BEEP-ON" ( ) or "BEEP-OFF."
z
AUX-A* 1 (AUX Audio)
To turn the AUX source display "AUX-A-ON"
( ) or "AUX-A-OFF" (page 12).
z
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off.
– "A.OFF-NO" ( ), "A.OFF-30S (Seconds),"
z
"A.OFF-30M (Minutes)" or "A.OFF-60M
(Minutes)."
DEMO* 1 (Demonstration)
To set "DEMO-ON" (
z
DIM (Dimmer)
To change the brightness of the display.
– "DIM-AT" ( ): to dim the display
z
automatically when you turn lights on.
– "DIM-ON": to dim the display.
– "DIM-OFF": to deactivate the dimmer.
ILM (Illumination)
To change the illumination color: "ILM-1" (
or "ILM-2."
) or "DEMO-OFF."
)
z
M.DSPL (Motion Display)
To select the Motion Display mode.
– "M.DSPL-SA" ( ): to show moving patterns
z
and spectrum analyzer.
– "M.DSPL-ON": to show moving patterns.
– "M.DSPL-OFF": to deactivate the Motion
Display.
A.SCRL (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– "A.SCRL-ON" ( ): to scroll.
z
– "A.SCRL-OFF": to not scroll.
LOCAL (Local seek mode)
– "LOCAL-OFF" ( ): to tune normal reception.
z
– "LOCAL-ON": to only tune into stations with
stronger signals.
MONO*
2 (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "MONO-OFF" ( ): to hear stereo broadcast in
z
stereo.
– "MONO-ON": to hear stereo broadcast in
monaural.
LPF*
3 (Low Pass Filter)
To select the subwoofer cut-off frequency: "LPF
OFF" ( ), "LPF125Hz" or "LPF 78Hz."
z
BTM (page 8)
*1 When the unit is turned off.
*2 When FM is received.
*3 When the audio output is set to "SUB."

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number
Disc number
Playback starts.
continue to next page t
11