Listening To Music On A Mass Storage Class Type Audio Device; Listening To Music On "Walkman" (Atrac Audio Device); Other Functions; Changing The Sound Settings - Sony CDX-GT610U Operating Instructions Manual

Listening to music on a Mass
Storage Class type audio device
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
Select
TRACK
ALBUM
SHUF ALBUM
SHUF DEVICE
To return to normal play mode, select "
or "SHUF OFF".
Listening to music on "Walkman"
(ATRAC Audio Device)
1
During playback, press (MODE)
repeatedly until the desired setting
appears.
The item changes as follows:
ALB (Album) t ART (Artist) t PLY
(Playlist)
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
Select
TRACK
ALBUM
ARTIST
PLAYLIST
SHUF ALBUM
SHUF ARTIST
SHUF PLAYLIST
SHUF DEVICE
To return to normal play mode, select "
or "SHUF OFF. "
10
To play
track repeatedly.
album repeatedly.
album in random order.
device in random order.
OFF"
To play
track repeatedly.
album repeatedly.
artist repeatedly.
playlist repeatedly.
album in random order.
artist in random order.
playlist in random order.
device in random order.
OFF"

Other functions

Changing the sound settings

Adjusting the sound
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press the select button repeatedly
until "BAL," "FAD" or "SUB" appears.
The item changes as follows:
LOW* t MID* t HI*
1 1
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*
*1 When EQ3 is activated (page 10).
*2 "ATT" is displayed at the lowest setting, and can
be adjusted up to 20 steps.
*3 When AUX source is activated (page 12).
2
Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 2, to adjust the selected item, press <, M, ,
or m.

Customizing the equalizer curve

— EQ3

"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press (EQ3)
repeatedly to select "CUSTOM."
2
Press the select button repeatedly
until "LOW," "MID" or "HI" appears.
3
Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
t
1
2 t AUX* 3