Factory Setting Mode - HANNspree ST259MUB User Manual

25"

Table of Contents

4. During the setting process, releasing the electronic equipment button exits the

setting mode immediately without changing the status prior to setting.

5. Buttons other than CH+/CH- are not functional during search. Channel buttons

include CH+ and CH-.

6.1.6

Factory Setting Mode

Factory setting operation procedures are as follows:

1. Press the corresponding electronic equipment button. The indicator light will come

on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on

again, showing setting mode has been entered.

2. While holding the electronic equipment button, first press < (left arrow), then press

OK. The indicator then goes off and setting mode is exited, showing factory setting

has been restored.

3. During the setting process, releasing the electronic equipment button exits the

setting mode immediately without changing the status prior to setting.

4. Pressing any of the electronic equipment buttons to enter factory setting operation

mode.

5. The default current electronic equipment is TV upon first power-on.

Electronic

equipment

CABLE

AUDIO

DVD

Code

Provided by

1001

manufacturer

Transmit TV code

Note

Table of Contents

Show Quick Links

Table of Contents