Page 1
SPEED MAX 300 ULTRA-FAST ELECTRIC HAND DRYER (BRUSHLESS MOTOR) WITH HOT AIR ASSORTMENT SM-300AI04JT000 SM-300AS02JT000 Polished Anthracite SM-300AI05JT000 SM-300AS01JT000 Brushed White SPECIFICATION ITEM Compact electric hand dryer with activation by photocell and brushless motor. Stainless steel lid. Locking system with steel screws.
SPEED MAX 300 ULTRA-FAST ELECTRIC HAND DRYER TECHNICAL SPECIFICATIONS Sm300 activation sensor motor 38000 RPM, 550 W brushless 110-120 V; 60 Hz; 8,3 A; 1000 W voltage (-1) voltage (-2) 220-240 V; 50/60 Hz; 4,3 A; 1000 W air temperature 40°C;...
SPEED MAX 300 ULTRA-FAST ELECTRIC HAND DRYER INSTALLATION • Ensure that the power switch is turned off. Installation must comply with the regulations in force in your country. Installation should only be carried out by a qualified electrician. • Position the template against the wall at the desired height (see installation height recommendations on the following page).
SPEED MAX 300 ULTRA-FAST ELECTRIC HAND DRYER INSTALLATION RECOMMENDATIONS regulatory configuration adaptability for disabled people WARNINGS It is recommended to avoid installing the HAND DRYER near highly reflective objects (mirrors, stainless steel washbasins, etc.) in order to avoid malfunctioning of the presence sensor.
SPEED MAX 300 ULTRA-FAST ELECTRIC HAND DRYER CLEANING AND MAINTENANCE Make sure the power switch is turned off or disconnect the power supply to the hand dryer. After this precaution, cleaning can be carried out. Periodic cleaning of the unit is recommended. Remove the cover and clean the lint from the dryer dust.
Need help?
Do you have a question about the SPEED MAX 300 and is the answer not in the manual?
Questions and answers