Chapter 3. Mykey; System Setup - IBM 22P9230 User Manual

Chapter 3. MyKey

Use MyKey to access and customize your Memory Key through the Memory Key
console. Messages and prompts guide you through the short MyKey installation,
use, and customization procedures, to make your Memory Key more personal, fun,
and easier to use. This chapter also includes some important frequently asked
questions (FAQs).
The MyKey application works in administrator and non-administrator modes. For
more information, see Chapter 5, "KeySafe II and MyKey in Non-Admin Mode,"
on page 5-1.
For optimal performance, the key works with a graphic accelerator that supports
24-bit color depth.

System setup

Your computer must meet the following requirements for you to install and use
MyKey:
v Pentium
v 1.7 MB free disk space (on drive C)
v Operating system: Windows 2000 or Windows XP
MyKey is supported on IBM 2.0 Memory Keys. If your Memory Key supports
MyKey, make sure that you have the latest MyKey version, which you can
download from http://www.ibm.com/pc/support. Search for USB 2.0 Memory
Key.
To install MyKey, complete the following steps:
1. Insert the IBM USB 2.0 Memory Key CD that comes with your key and open the
2. Double-click the MyKey icon.
3. In the Welcome window, select the Create Desktop Shortcut check box if you
© Copyright IBM Corp. 2004
®
II 266 MHz
Software folder.
want a shortcut to MyKey on your desktop. A shortcut to MyKey and Uninstall
MyKey is automatically created in the Start menu. Click Finish to start using
MyKey, or Cancel to cancel the installation.
3-1