Chapter 2. Installing The Memory Key In Windows 2000 Or Windows Xp - IBM 22P9230 User Manual

Chapter 2. Installing the Memory Key in Windows 2000 or
Windows XP
Before you install the IBM USB 2.0 Memory Key, make sure that you have the
following software and hardware:
v One of the following operating systems:
v An available USB connector
v Pentium II 266 MHz
v 1.7 MB free disk space
v Access to the main drive (usually drive C)
The following items are necessary if you will be using the Memory Key as a
bootable device. See Chapter 6, "Using IBM Memory Key Boot Utility," on page
6-1
v BIOS that supports bootable USB storage devices. If you are uncertain about
v The BIOS documentation that came with your computer or BIOS update, if
Windows 2000 and Windows XP have built-in support for the USB 2.0 Memory
Key, and no device drivers are required. Attach the Memory Key to the USB
connector. The Memory Key is now ready to use and is displayed as a removable
disk with a letter designation (for example, E:).
© Copyright IBM Corp. 2004
– Windows 2000
– Windows XP
whether the BIOS supports bootable USB devices, contact your computer
manufacturer. An update might be available.
applicable.
2-1