OROSYS Two Notes Torpedo Reload II User Manual page 20

Last update: 2025/02/19 15:44
Please note the following important considerations when placing GENOME in Reload II's FX Loop
The example above uses a single amplifier input instantiated across both of Torpedo Reload II's
channels (A&B); this is important to configure using the SOURCE selection switches on Reload
II's front panel if running Stereo FX in the related GENOME RIG
The LOOP LEVEL switch for both channels should be configured for +4dBu operation as the
connected interface will be outputting a Line Level signal
The loop behaviour should be configured for DUAL MONO operation
Within GENOME's instantiated STUDIO FX, it is advised that the components are configured with
a 100% wet signal. Failure to do so may induce phasing issues between Reload II's Dry
(Channel) and Wet (FX Loop RETURN) signals.
The DRY/WET knobs for each Channel should be configured to taste in line with how much of
the Wet signal should be heard via the CAB or LINE OUT outputs.
6.4 Using Reload II In Conjunction with GENOME's TSM / TSM-Ai Amplifier
Models and Front-Loaded PEDAL Arsenal
Reload II can be configured as an amplifier for GENOME's TSM / TSM-Ai Amplifier Models via the CAB
OUT outputs for the ultimate hybrid backline. The following connectivity diagram highlights how this
can be accommodated in a stereotypical setup.
https://wiki.two-notes.com/
reloadii:reloadii_user_s_manual https://wiki.two-notes.com/doku.php?id=reloadii:reloadii_user_s_manual
Printed on 2025/02/19 18:22