OROSYS Two Notes Torpedo Reload II User Manual page 12

Last update: 2025/02/19 15:44
The Temperature Warning Indicator will illuminate when the temperature inside Torpedo Reload II
exceeds 100°C. This is measured at 2 points: the Loadbox and Poweramp. When active, Torpedo
Reload II will mute itself and disconnect the load box immediately to avoid any possible damage
stemming from excessive power dissipation. If this occurs, please configure Torpedo Reload II to
output less power by turning down the CAB front panel volume controls, or adjust the power feeding
the device by turning down the master volume on an amplifier connected to the AMP IN.
3. Torpedo Reload II's Advanced Functionality
Torpedo Reload II has been engineered to deliver the pinnacle in Two notes' stage-centric
amplification & attenuation knowhow; as such an understanding of the following key functions is
paramount to configuring Torpedo Reload II within a given rig.
3.1 Amp Input Level Optimization
Located on the front-plate of Torpedo Reload II is the AMP IN LEVEL controls (Knob & LED Indicator).
Correct configuration of this input-centric control is vital when priming any Amplifier to leverage all
the might Reload II's dual 215W per-channel power amplifier delivers. When connecting an amplifier,
first set the level using the AMP IN LEVEL knob, ensuring the source level falls within the "OK" range,
highlighted via the related LED indicator.
3.2 Output Connectivity
Within Reload II's Architecture, the attenuation/amplification CAB OUT outputs and companion LINE
outputs can be used simultaneously; such facilitates simultaneous recording of the dry output from
your amplifier's speaker output alongside traditional miking of the cabinet(s) connected to Torpedo
Reload II.
https://wiki.two-notes.com/
reloadii:reloadii_user_s_manual https://wiki.two-notes.com/doku.php?id=reloadii:reloadii_user_s_manual
Printed on 2025/02/19 18:22