GSG Purpose GSG Purpose This document describes how to install, configure, and begin using the NI PXIe-7972R (NI 7972R). The NI 7972R is a FlexRIO FPGA module designed to work with your FlexRIO adapter module to create a FlexRIO system.
GSG Purpose Document Location Description about LabVIEW features on real- time operating systems. Contains information about the FPGA module front panel connectors and I/O, controller Available from the Start menu for FlexRIO front panel FlexRIO Help and at ni.com/manuals. connectors and I/O, programming instructions, and adapter module component- level IP (CLIP).
GSG Purpose ni.com/manuals, and search for the document title. Note When exposed to transient electromagnetic phenomena such as electrostatic discharge (ESD) or power surges, this product may experience a temporary upset or other performance degradation that requires more than 10 seconds for self-recovery. Note The FlexRIO FPGA module front panel interface is sensitive to electrostatic discharge.
GSG Purpose • At least one cable for connecting signals to the FlexRIO device. Refer to your adapter module documentation for a list of applicable cables and accessories for your FlexRIO system. Related tasks: • Installing the Software and Driver Using NI Package Manager Installing the Software and Driver Using NI Package Installing the Software and Driver Using NI Package Manager...
GSG Purpose Maximum altitude 2,000 m at 25 °C ambient temperature Indoor use only. Refer to the NI 7972R Specifications at Note ni.com/manuals complete specifications. Caution Clean the hardware with a soft, nonmetallic brush. Make sure that the hardware is completely dry and free from contaminants before returning it to service.
MAX is automatically installed with FlexRIO Support. 1. Launch MAX by navigating to Start » All Programs » National Instruments » NI MAX or by clicking the NI MAX desktop icon.
Installing PXI EMC Filler Panels To ensure specified EMC performance, PXI EMC filler panels must be properly installed in your FlexRIO system. The PXI EMC filler panels (National Instruments part number 778700-01) must be purchased separately. 1. Remove the captive screw covers.
GSG Purpose Figure 5. PXI EMC Filler Panels and Chassis 1. Captive Screw Covers 2. Captive Mounting Screws 3. EMC Gasket Note You must populate all slots with a module or a PXI EMC filler panel to ensure proper module cooling. Do not over tighten screws ( 2.5 lb · in. maximum).
GSG Purpose NI 7972R NI 7972R Module Signals Module Signals The following figure shows the available signals on the NI 7972R. Figure 6. Front Panel Connector Pin Assignments and Locations Secondary Side Primary Side Secondary Side Primary Side +3.3V +3.3V S148 GPIO_CC_39 S 114...
Need help?
Do you have a question about the NI PXIe-7972R and is the answer not in the manual?
Questions and answers