Remove The Shipping Materials - Canon B45 - Faxphone B45 Bubble Jet Fax Machine Setup Sheet

Remove the shipping materials.

1 Remove the shipping tapes q from the top of the fax and the taped protective piece w .
2 Open the printer cover by gently pulling it towards you.
3 Remove the shipping tapes q and the protective pieces w.
Close the printer cover until it locks into place.
1
1
2
NOTE
The actual shipping materials may differ in shape, quantity, and position from the ones shown above.
Assemble the machine and load paper.
1 Insert the tabs on
the multi-purpose
tray into the slots
on the unit.
2 Squeeze, then slide the
paper guide to the left.
3 Fan a stack of paper,
then tap the edge of the
stack on a flat surface to
even the stack.
2
1
2
5 Insert the tabs on the
document tray into the
corresponding slots.
1
3
4 Insert the stack into
the multi-purpose tray
q, and align the right
edge of the stack w
with the right side of
the multi-purpose tray.
Then slide the paper
guide e snugly
against the left edge of
the stack.
2