Seagate BlackArmor NAS 110 User Manual page 22

If the hard drive has several partitions (not counting hidden ones), then the program will
use a non-system partition with maximum free space
If the drive has only one non-hidden partition, namely, the system partition:
o If the program detects any internal hidden partition (non-BlackArmorSZ), it will back
up to the system partition
After applying this algorithm to your computer configuration, Seagate BlackArmor Backup
will offer the optimum place for storing your backups. If you would prefer another storage
location, click the Specify destination link and select the storage location most suitable for
you.
Clicking Protect will start the backup task. But before proceeding with the backup, the
program will ask you under whose user credentials the subsequent scheduled backups will
run.
Clicking Cancel will cancel One-Click Protection. If you decide to use this feature later, click
Home on the sidebar and then choose One-Click Protection on the right pane of the
Welcome screen.
The system will always keep the last backup archive. When a task for another backup
begins, the older backup is deleted – freeing space for the backup in progress.
If there is not enough free space on your Seagate NAS device, the program will notify you
that it cannot back up the system volume and will suggest that you specify a destination for
backup yourself.
22 Copyright (c) 2000-2009 Acronis. All rights reserved.
Copyright (c) 2009 Seagate Technology LLC. All Rights Reserved.