Seagate BlackArmor NAS 110 User Manual page 126

SATA controllers usually appear under the SCSI and RAID controllers section of
Device Manager, while hard drives are listed under the Disk drives section.
The SATA controller and SATA hard drive must not be displayed in the Device
Manager with a yellow exclamation mark or any other error indication.
8. After you have installed the hard disk in your computer and have configured it in
BIOS, one can say that the PC "knows" about its existence and its main parameters.
However, it is still not enough for the operating system to work with the hard disk.
In addition, you have to create partitions on the new disk and format the partitions
using Seagate BlackArmor Backup. See
configure your BIOS to boot from the SATA controller and boot from the SATA hard
drive to ensure it works.
126
Chapter 14. Adding a new hard disk
Copyright (c) 2000-2009 Acronis. All rights reserved.
Copyright (c) 2009 Seagate Technology LLC. All Rights Reserved.
. Then