Seagate BlackArmor NAS 110 User Manual page 109

In the Post-wiping Actions window you can select actions to be performed on the partitions
selected for data destruction. BlackArmor DriveCleanser offers you three choices:
Leave partition(s) as is — just destroy data using the method selected below
Delete partition(s) — destroy data and delete partition
Format — destroy data and format partition (default)
In this example, the switch is set to Format. This will allow you to see the results of partition
and data destruction, along with the reformatting of the partition.
After you select a post-wiping action and click Next, BlackArmor DriveCleanser will display
the data destruction task summary. Up to this point, you can make changes in the created
task. Clicking Proceed will launch the task execution. BlackArmor DriveCleanser will perform
all actions necessary for destroying the contents of the selected partition or disk. After this is
done, you will see a message indicating the successful data destruction.
Copyright (c) 2000-2009 Acronis. All rights reserved.
Copyright (c) 2009 Seagate Technology LLC. All Rights Reserved. 109