Vent Cap Figure 1: Typical 4-Way, 3-Position PU55 Series (PU55M4N025B Shown) Oil Outlet Port Drain Plug Reservoir Oil Level View Gauge Figure 1: Typical 4-Way, 3-Position PU55 Series SPECIFICATIONS (PU55M4N025B Shown) Output Flow Rate Usable Current Draw Noise Weight / Min)
Page 3
WARNING • Read, understand, and follow all instructions provided with • Do not operate this device in an extreme temperature, and on this device before use. explosive atmosphere or in the presence of conductive • All WARNING statements must be carefully observed to liquids.
BEFORE USE 1. Check oil level, add oil if necessary. 2. Make sure system fittings and connections are tight and Read, understand, and follow all printed materials carefully leak free. before attempting to assemble or operate these pumps. 3. Place control valve lever in the middle (Neutral/Hold) position to prevent accidental lifting or moving of load.
2. Inspect hoses and connections daily. Replace damaged Changing Hydraulic Oil components immediately with BVA Hydraulics 1. For best results, change hydraulic oil once a year. replacement parts only. 2. Remove drain plug, tilt the pump then pour used fluid into 3.
Page 6
Electric Pump Service Parts MODELS: PU55M3L025B, PU55M3N025B, PU55M4L025B, PU55M4N025B SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 7
Manifold Block Assembly Parts MODEL: E83-4-5003-107 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 8
Piston Block Assembly Parts MODEL: E10-4-4000-109 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Model No. E10-4-4000-109 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 9
Lower Plate Assembly Service Parts MODEL: E83-4-5100-105 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 10
Gear Pump Assembly Service Parts MODEL: E05-4-6020-102 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 11
Motor Assembly Service Parts MODELS: E83-4-9001-103 & E83-4-9002-205 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 12
Reservoir Service Parts MODEL: RES025-01 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 13
RES03-01 Service Parts SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 14
RES05-01 Service Parts SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 15
E30-6-9107-100 Cable Gland (II), 240V E82-6-9711-109 Power Supply Unit Model 614-1-0030-050 Screw E30-6-9101-108 Cable Gland (III) Switch Base None PU55 Series, 240 V Model E82-6-9200-104 ON/OFF 4P Toggle Switch 996-3-0100-108 Power Cord E83-6-9712-108 Power Relay 614-1-0030-207 Screw 614-1-0040-017 Screw 649-1-0060-113...
Page 16
PU55 Series Basic Wiring MODELS: PU55M3N025B, PU55M3N03B, PU55M3N05B, PU55M4N025B, PU55M4N03B, PU55M4N05B SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
Page 17
• Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components.
Page 18
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.com...
Page 19
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.com...
Page 20
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.com...
Need help?
Do you have a question about the PU55 Series and is the answer not in the manual?
Questions and answers