POSSIBLE SYMBOLS ON THE DISPLAY
Indication on the display
H
II
Lo
--
E/F
88
Power level
0
1 - 2
3 - 5
6 - 11
12 - 14
15 / b
USING THE PAUSE FUNCTION
• It is possible to pause the cooking process. Heating of the cooking zones is temporarily stopped without having to switch
off the entire hob.
• When the pause function is switched on, all keys are switched off, except for the on/off key.
Switching on the pause function
1. Briefly press the pause key
Switching off the pause function
1. Briefly press the pause key
LOCKING AND UNLOCKING OPERATION OF THE APPLIANCE
The child lock can be switched on to prevent unintended use, such as children that switch on the cooking zones by accident.
Note: when the child lock is activated, all keys are switched off, except for the on/off key. In an emergency situation,
you can always switch off the appliance with the on/off key, but you will have to unlock the appliance when you want
to use it the next time.
Locking the appliance
1. Make sure the hob is switched on.
2. Press and hold the child lock key
Unlocking the appliance
1. Press the child lock key
2. The display shows [--] or the current setting when the hob is unlocked.
33
•
English
Error message. Place a suitable pan on the active cooking zone or switch off the cooking zone.
Something has been placed on the control or the cookware is unsuitable or too small.
Residual heat indicator: the cooking zone is still too warm to touch.
Pause indicator: the cooking zones are no longer being heated.
The child lock is activated.
The induction hob is standby.
A breakdown has occurred. Check the message using the ERROR CODE table in section 7.
The set power of the cooking zone or timer.
The cooking zone is switched off
Soft simmering and slow heating.
Heating and bringing to a simmer quickly.
Average cooking.
Boiling and frying.
Searing, stir-frying and bringing to a boil.
. The timer display and active cooking zones will show [II].
.
for 3 seconds. The display shows [Lo] when the hob is locked.
for a few seconds.
Description
Use
Need help?
Do you have a question about the IKI8045 and is the answer not in the manual?
Questions and answers