Equalizer Control; Tone Setup - Kenwood DDX616 Instruction Manual

Audio Control
Equalizer Control
You can set up the equalizer.
D
Display the Equalizer screen
Touch [Ga]
>
[{l@J]
>
[Equalizer]. (page 59)
II
Set each item
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"l "Rock"j "Pop"l "Easy"l "Top40"1
"Jazz"l "User"
~
~
. "User":
Your own tone curve can be created. See <Tone
Setup> (page 60).
[SystemQ-EX] Selects items to be adjusted for
tone curve setup.
If selected "OFF", only Level can be set up for
tone curves.
[Tone] Displays the Tone curve setup screen.
(page 60)
Tone Setup
You can set a Tone curve.
D
Display the Equalizer screen
Touch [€I]
>
[~]
>
[Equalizer). (page 59)
D
Display the Tone Control screen
"
To
<e~
E!!!' ,..
Ridgeview Road 99.99'rn
- - - - - _
...
D
Set the Tone
[Bass] Bass adjustment items are displayed.
[Middle] Middle adjustment items are
displayed.
[Treble] Treble adjustment items are displayed.
[Flat] Tone level becomes 0 (fiat).
[FREQ] Sets the Center frequency.
[Level] Sets the level.
[Q Factor] Sets the Q factor. (Only [Bass] and
[Middle] can be set)
[Bass DC EXT] Bass DC Extend settings. (Only
[Bass] can be set)
If turned "ON", it extends the bass center
frequency to the low register by approximately
20%.
[SW Level] Adjusts the subwoofer volume.
The setting is available when subwoofer is set
to "ON". See <Speaker Setup> (page 75).
60
e
DNX SERIES ONX6960/0NX6160/0NX6020EX/ONX6460BTjDNX5160