Panel Color Coordinate - Kenwood DDX616 Instruction Manual

Setup Menu
iii
Load the image
IT]
Rotates the image.
~
• See <About Picture files> (page 6) for readable image
specifications.
• The [Memory] button on the "Background" screen
becomes active only in STANDBY source mode.
• Pressing the [Memory] button on the "Background"
screen switches the AV OUT source to OFF.
For resetting the AV OUT source, refer to <AV Interface
Setup> section.
• While loading the Background image, any other
operation is prohibited.
Background Change
Selects a image for background.
D
Select Background Change screen
B
Select a image for background
IT]
Returns to the initial background.
II
Set the image as the background
r ,
C!
Panel Color Coordinate
Sets the button illumination color.
D
Display the Color screen
Touch
[e]
>
[:t--]
>
[Display]
>
[Color].
(page 62)
B
Display the Panel Color Coordinate screen
[Initialize] Initialization resets the settings
made using the Panel Color to the default
settings made at the factory.
[Panel Color Scan] When set to "ON", the
illumination color of the buttons changes one
after another.
~
~
• When touching [SET] or [Initialize], make sure [Panel
Color Scan] is set to "OFF".
II
Select a color
P
e!
Color Coordinate
~l
AM
:H~P_8Gl:l'~
Ad,ust
.'!-"'"
m ..
RldgevlewRo_ad___ 99999.99,",
IT]
Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([Pl] - [P3J).
68 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160