Eclipse CD5000 - - Radio Owner's Manual page 64

Various Settings
5
Press the [RTN] button.
ATTENTION:
•Sound quality data is written to Memory Stick as follows.
MSFTEN
•The folders and files that are required for E-iSERV sound effect customizations are created
automatically when the data is written to the Memory Stick.
•Select a file in
Time alignment settings (Time Alignment)
This function corrects the position characteristics and frequency characteristics in order to delay the signals
being output from the various speakers so that the signals from each speaker reach the listening position at
the same time.
ATTENTION: Before selecting a position, make sure that CSII is OFF. (For details about turning CSII ON/
1
Turn the [SEL] button.
2
Press the [SEL] button.
Position selector setting (Position)
When the position of the listener's seat is selected, the time taken for the sound to travel from the speakers to
the listener can then be adjusted in order to obtain a more natural sound orientation. This main unit allows up
to four different positions to be set.
1
Turn the [SEL] button to select the setting item.
2
Press the [SEL] button.
3
Press the [RTN] button.
Other time alignment items can be set at this time.
ATTENTION: If the position selector is turned ON, the BAL and FAD settings will be canceled.
64
SOUND
206 000.ftn
File extension
Three digit number
Adjustment mode
(c:Advance Mode)
when uploading sound quality data to E-iSERV (web site).
MSFTEN SOUND
OFF, see page 61.)
➔ ➔
➔
Position Car Type
➔ ➔
➔ ➔
Rear SP Position ...
➔ ➔
➔
... Front L Front R
➔ ➔ ➔
➔ ➔ ➔
Rear OFF
➔
Tweeter
➔
Front
Front L ...