Related Manuals for Jason.L Quadro A Wood Counter Table Frame
Summary of Contents for Jason.L Quadro A Wood Counter Table Frame
- Page 1 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame Sizes: 1400x700 1600x700 2000x700 Tools Required: Power screwdriver; Allen key set (provided) 2 persons required for installation www.jasonl.com.au Need help! 1 of 11 1300 527 665 Call us on...
- Page 2 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame COMPONENTS Table top x1 Leg Quadro A (Half leg) x2 Leg wood add on x4 Leg bottom beam Upper beam x1 Lower beam x1 Plastic bracket x4 Feets or Wheels x4 SCREWS...
- Page 3 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame STEP 01 Plastic bracket holes facing to the other side. Insert the Leg wood add on (C) into the Leg You will notice two colored Both legs must have the colour stickers located on each leg.
- Page 4 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame STEP 02 Now use corner pads (N) to cover the holes Insert the Leg bottom beam (D) into the Leg wood add on (C), using Pins (M) where just inserted the head screw sockets.
- Page 5 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame STEP 02 STEP 01 TOP VIEW Using Allen Key provided, attach 2 plastic brackets per leg (G) (as per picture Using Allen Key provided, attach M8x20MM Socket head (J)- above) using M6x20MM (K) Socket head screw.
- Page 6 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame STEP 03 Adjust extendable beam (E) to desired length using markers and secure beam at that length using screws provided 2000 1900 1800 1700 1600 1500 1400...
- Page 7 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame STEP 04 Adjust extendable beams (F) to desired length. Remove plastic inserts Loosen 2 bolts on beam using allen key Extent lower beam to the same distance as upper beam Insert plastic inserts back into the beam www.jasonl.com.au Need help!
- Page 8 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame STEP 05 TOP VIEW STEP 06 Attach Upper Beam (E) to legs using nut insert. Frame looks like this. Using Allen Key, attach Upper Beam (E) with Sockets (I).
- Page 9 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame STEP 07 Frame looks like this. Using Allen Key. Tighen Sockets (I) on the Lower Beam (F) using Allen Key (O). Insert plastic spacers to improve regidity. Attach two Sockets (I) to the side of the lower side beams (as shown in the picture).
- Page 10 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame STEP 08 Place desktop on top of frame. Wood Screws to be drilled into the underneath Top. www.jasonl.com.au Need help! 10 of 11 1300 527 665 Call us on...
- Page 11 A S S EMBLY INS T R U CT IONS Quadro A Wood Counter Table Frame If purchase with wheels: WHEELS ASSEMBLY DONE! Replace Feet on the bottom of each leg with wheels (H) www.jasonl.com.au Need help! 11 of 11 1300 527 665 Call us on...
Need help?
Do you have a question about the Quadro A Wood Counter Table Frame and is the answer not in the manual?
Questions and answers