Table of Contents
Advertisement
Quick Links
Outdoor Dual-Band 2.4GHz & 5.8GHz
WIRELESS BRIDGE
USER MANUAL
Model: CPE852
Tips:
Thank you for ordering and using UeeVii CPE852 Wireless Bridge, please
read the manual carefully before use. If there are any problems during the
use, please contact us in time. The installation of this device requires some
network knowledge. If you can't install it, please let us know or contact a
professional.
Customer Service Email: support@ueevii.com
Advertisement
Table of Contents
Related Manuals for UeeVii CPE852
Summary of Contents for UeeVii CPE852
- Page 1 Model: CPE852 Tips: Thank you for ordering and using UeeVii CPE852 Wireless Bridge, please read the manual carefully before use. If there are any problems during the use, please contact us in time. The installation of this device requires some network knowledge.
- Page 2 OVERVIEW 1. Introduce UeeVii CPE852 is a long-distance dual-band 2.4GHz & 5.8GHz wireless transmission device. It uses wireless communication technology to transmit network data using air as a medium to perform long-distance point-to-point or point-tomultipoint interconnection. The working data link layer realizes the interconnection of local area networks 5KM.
- Page 3 8. WDS networking mode, video network dual compatible； 9. Support point-to-point, point-to-multipoint mode； 10. Dynamic MIMO power saving mode (DMPS) and APSD； 11. Support 24V POE power supply, easy to install and deploy； 12. Support WEB GUI access management device. Email: support@ueevii.com...
- Page 4 3. Specififications Brand UeeVii CPE852 Model MT7620A&MT7612EN&JL2101D 8MByte Flash DRAM DDR2 64MByte Net working 10/100/1000Mbps Ethernet Port LAN*1 10/100Mbps Ethernet Port LAN*1 Interface Datarate 11g：6/9/12/18/24/36/48/54Mbps 11n：300Mbps(max.) 11ac+: 900Mbps(max.) Transfer method Direct Sequence Spread Spectrum(DSSS) Modulation OFDM/BPSK/QPSK/CCK/DQPSK/DBPSK Protocol standard IEEE802.11b/g/n, IEEE802.11a, IEEE802.11ac，...
-
Page 5: Package Contents
4. PackageContents 2* CPE852 Gigabit Bridge 2* Gigabit POE Adapter(24V) 2* Cat5e Network Cable 2* Metal Hoop 1* User Manual 5. InterfaceDetails Digital Tube LED (Digital numbers 0 1 2 3 4 5 6 7 8 9; Or Letters A,b,C,d,E,F;... -
Page 6: Led Indicator Details
7. LED Indicator Details WLAN Signal Light ..LAN2 LAN1 Power Indicator Receiver A Mode Transmitter B Mode Digital TubeLED Digital numbers: 0 1 2 3 4 5 6 7 8 9; Or Letters: A,b,C,d,E,F;total 16 channels; Email: support@ueevii.com... -
Page 7: Quick Start
1.2. Must use the supplied PoE plug for power source. Other PoE plugs or PoE switches might not comply with our device. 1.3. Connect the network cable from router to the 1000mbps port of the wireless bridge to help get a higher network speed. Email: support@ueevii.com... - Page 8 6. Wait for 2-5 minutes to complete the pairing. When the number of the digital tube is solid and the signal light on the side turns on, it means their pairing is successful; 7. Finally connect other devices(Router, PC, Switch) and install them to the target location. Email: support@ueevii.com...
-
Page 9: Installation
CPE, the bracket is not included in the package. Recommended UeeVii Universal Bracket (ASIN: B09NLLG8MZ). 2. Please, prepare a long enough network cable to connect the PoE... -
Page 10: Application Case
4. WiFi Function The Wi-Fi function is turned on by default for the master bridge! And CPE852 master bridge broadcasts 2.4GHz and 5.8GHz dual band Wi-Fi SSID at the same time;the slave doesn't broadcast wifi, suggest to install a router on slave side. - Page 11 2.4/5.8G Camera 2.4/5.8G Camera 2.4/5.8G Camera 5.3 Case 3: Point-to-multiple point extended surveillance cameras range 2.4/5.8G Camera 2.4G/5.8G DVR 2.4/5.8G Camera 2.4/5.8G Camera 2.4/5.8G Camera 5.4 Case 4: Point-to-point extended surveillance cameras range 2.4/5.8G Camera 2.4/5.8G Camera 2.4/5.8G Camera Email: support@ueevii.com...
-
Page 12: Advanced Settings
Refer to the picture above to open. Step 3: Find and double-click open the "Internet Protocol Version 4(TCP/IPv4)", choose the " Use the following IP address" and enter IP address, subnet mask, Default gateway, Preferred DDS server. Email: support@ueevii.com... - Page 13 On the login screen, the default user name and login password of the wireless bridge is "admin", just entry password login. Note: “admin” is not the password of the WiFi SSID, it is just the password for WEB access. 5. Login successful, go to setting. Email: support@ueevii.com...
- Page 14 CPE5G_5G124 cpe123456124 192.168.255.107 192.168.255.207 CPE5G_5G128 cpe123456128 192.168.255.108 192.168.255.208 CPE5G_5G132 cpe123456132 192.168.255.109 192.168.255.209 CPE5G_5G136 cpe123456136 192.168.255.110 192.168.255.210 CPE5G_5G140 cpe123456140 192.168.255.111 192.168.255.211 CPE5G_5G149 cpe123456149 192.168.255.112 192.168.255.212 CPE5G_5G153 cpe123456153 192.168.255.113 192.168.255.213 CPE5G_5G157 cpe123456157 192.168.255.114 192.168.255.214 CPE5G_5G161 cpe123456161 192.168.255.115 192.168.255.215 CPE5G_5G165 cpe123456165 Email: support@ueevii.com...
- Page 15 1. Log in to the web management system of the master and slave bridge respectively, and set the master and slave bridge as the subnet of your existing network 1)Enter the IP address of the master bridge in the browser: 192.168.255.XXX to log in to the master bridge Email: support@ueevii.com...
- Page 16 3)Enter the IP address 192.168.255.XXX of the slave bridge in the browser to log in to the slave bridge 4)After logging in, change the IP address of the slave bridge from 192.168.255.XXX to the existing subnet 192.168.5.xxx, assuming it is 192.168.5.121 Email: support@ueevii.com...
- Page 17 On the slave side, it should be Slave CPE -> (Switch) -> laptops or other devices 3) Your laptop should have IP as 192.168.5.xxx and be able to browse the Internet. If so, you're all set for deployment. Email: support@ueevii.com...
-
Page 18: Troubleshooting
Can not login WEB 3. LAN connection or 3. Check LAN connection and ethernet cable has a Ethernet cable problem 4. Clear cookie, run arp -d to 4. Too much cookie, MAC clear MAC address address haven't update Email: support@ueevii.com... - Page 19 Device always dead reboot it (You can set （too much memory) scheduled restart) 3. Lightning stroke 4. After lightning, device PoE port broken or unstable better to deploy lightning conductor 5. If still can’t solve, please contact us to solve. Email: support@ueevii.com...
-
Page 20: Technical Support And Service
If there are any problems during the use, please contact us in time; B. The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional. Tech Service Email: support@ueevii.com Email: support@ueevii.com...
Need help?
Do you have a question about the CPE852 and is the answer not in the manual?
Questions and answers