Table of Contents
Advertisement
Quick Links
Wireless Bridge
User Manual
Model: CPE902
Tips:
Thank you for ordering and using CPE902 Wireless Bridge, please read the
manual carefully before use. If there are any problems during the use,
please contact us in time. The installation of this device requires some
network knowledge. If you can't install it, please let us know or contact a
professional.
Customer Service Email: support@ueevii.com
Advertisement
Table of Contents
Related Manuals for UeeVii CPE902
Summary of Contents for UeeVii CPE902
- Page 1 User Manual Model: CPE902 Tips: Thank you for ordering and using CPE902 Wireless Bridge, please read the manual carefully before use. If there are any problems during the use, please contact us in time. The installation of this device requires some network knowledge.
-
Page 2: Product Introduce
Realize point-to-point and point-to-multipoint outdoor coverage and applications. Very suitable for Internet expansion and monitoring range expansion of garages, barns, shops, docks, etc. Package List: 2 x CPE902 Bridge；2 x PoE Adapter; 2 x Network Cables；2 x Metal Hoop 1 x English User Manual support@ueevii.com... -
Page 3: Product Features
• The optimal heat dissipation design improves the stability of the product at high temperatures. • Special TVS surge protection devices are used to improve product stability in harsh environments. Product Specifications: CPE902 Wireless Bridge Model CPE902 QCA9563+QCA9886+8334 Flash SPI NOR 16MB... - Page 4 SYS light, WAN light, LAN light, 5G WIFI light light Maximum power < 15W consumption Dustproof and IP65 waterproof rating size 260mm*85mm*45mm Normal operating temperature :-30°C to 55°C Working Limit operating temperature :-40°C to 70°C Environment Storage temperature: -40°C to 70°C Humidity: 5% ~ 95% (no condensation) support@ueevii.com...
- Page 5 SYS Light: Solid means power supply is normal LAN Light: Solid means LAN port has been connected WAN Light: Solid means WAN port has been connected 5G Light: Blinking state indicates normal operation Product Specifications: Display Function Button Selector Button Reset Butto support@ueevii.com...
-
Page 6: Button Operation
Simple Instructions ： One set as master bridge, and another set as slave bridge, then press “reset” button of them respectively for 1s within one minute, and waiting for pairing will be ok. Quick Start 1. How to connect: support@ueevii.com... - Page 7 After setting master bridge and slave bridge, please press the reset button for 1s for the master bridge and multiple slave bridges respectively to initiate the pairing. Note: The reset button of bridges need to be pressed with one minute. support@ueevii.com...
- Page 8 “H”, slave bridges show”C”, then it means they have been paired successfully. (Generally speaking, if you just want to complete pairing, above step will be ok.) Some Settings for CPE902 Modification of channel: To avoid interference, it is necessary to stagger the channels. Just modify the master bridge channel will be ok.
-
Page 9: Application Case
2. The 2 wireless network bridges must be installed face to face as much as possible, with no architectural obstacles in between, strong electricity, and strong magnetism. 3. The theoretical working distance of CPE902 wireless bridge is 5KM, and the actual application should be less than 5KM. Application Case: 1. -
Page 10: Advanced Settings
Advanced Settings Note: You can enable the device without advanced settings Computer Access 1. Connect the CPE to the computer Refer to the figure left to connect the CPE to the computer through a PoE adapter and an Ethernet cable. support@ueevii.com... - Page 11 Connection" to right-click to open the network properties. Refer to the picture above to open. Step 3: Find and double-click open the "Internet Protocol Version 4(TCP/IPv4)", choose the " Use the following IP address" and enter IP address, subnet mask, Default gateway, Preferred DDS server. support@ueevii.com...
- Page 12 5. A login screen will appear, by default, the password of the wireless bridge is "admin", just entry password login. Note: “admin” is not the password of the WiFi SSID, it is just the password for WEB access. 6. Login successful, go to setting. support@ueevii.com...
- Page 13 1. Log in to the web management system of the master and slave bridge respectively, and set the master and slave bridge as the subnet of your existing network 1)Enter the IP address of the master bridge in the browser: 192.168.188.253 to log in to the master bridge support@ueevii.com...
- Page 14 1) At this time, the IP address of the master and slave bridge is your modified 192.168.5.xxx, enter the current IP address of the slave bridge 192.168.5.121 in the browser to log in to the slave bridge, and then scan the master bridge for pairing. support@ueevii.com...
- Page 15 On the master side, it should be Internet->ALDS/Router->Master CPE On the slave side, it should be Slave CPE -> (Switch) -> laptops or other devices 3)Your laptop should have IP as 192.168.5.xxx and be able to browse the Internet. If so, you're all set for deployment. support@ueevii.com...
-
Page 16: Troubleshooting
IP devices address 3. LAN connection or 3. Check LAN connection ethernet cable has a and Ethernet cable problem 4. Clear cookie, run arp -d to 4. Too much cookie, clear MAC address MAC address haven't update support@ueevii.com... - Page 17 2. Running time too long need a ground connection （too much memory) 2. Running time over 7 days, 3. Lightning stroke reboot it(You can set scheduled restart) 3. After lightning, device PoE port broken or unstable better to deploy lightning conductor support@ueevii.com...
-
Page 18: Technical Support And Service
If there are any problems during the use, please contact us in time; B. The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional. Tech Service Email: support@ueevii.com support@ueevii.com...
Need help?
Do you have a question about the CPE902 and is the answer not in the manual?
Questions and answers