Advertisement
WIRELESS BRIDGE
USER MANUAL
Model: CPE-240
Tips:
Thank you for ordering and using UeeVii Wireless Bridge, please read the
manual carefully before use. If there are any problems during the use, please
contact us in time.
The installation of this device requires some network knowledge. If you can't
install it, please let us know or contact a professional.
Customer Service Email: support@ueevii.com
Advertisement
Table of Contents
Related Manuals for UeeVii CPE-240
Summary of Contents for UeeVii CPE-240
- Page 1 USER MANUAL Model: CPE-240 Tips: Thank you for ordering and using UeeVii Wireless Bridge, please read the manual carefully before use. If there are any problems during the use, please contact us in time. The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional.
- Page 2 Introduce 1. Overview UeeVii CPE240 is a high-performance enterprise outdoor bridge product that works in 2.4G band supporting 802.11n technology. Unique digital tube pairing technology, easily completes point-to-point and point-to-multipoint (within 8 points) device pairing without computer configuration. 2 100Mpps network interface, 2.4G 802.11n MIMO technology wireless processing speed up to...
- Page 3 Important Certification Model: CPE-240 FCC ID: 2A6EJ-CPE450 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 4: Package Included
Package Included 2 * CPE-240 Wireless Bridge 2 * POE Adapter (24V) 2 * Network Cable 2 * Metal Hoop 1 * User Manual Details Part 1. M/S Button 2. DC Port 3. Reset/Digital switch 4. LAN 2 5. LAN 1/PoE... -
Page 5: Indicator Status Description
The green light is solid when the cable is connected LAN 1/LAN 2 and goes out when the cable is disconnected. When the bridge is powered on and works normally, WiFi the green light is solid. support@ueevii.com... -
Page 6: Poe Power Supply
2. The LAN port of the PoE power supply is connected to the PC, router, and switch. 3. Must use attached 24V~1A PoE power supply, do not support 48V PoE power adapter and PoE switch power supply (transferable data). Support 12V~1A DC power supply, not included. Refer to the connection below： support@ueevii.com... - Page 7 +1 every time you press it; 3) Set all bridges to the same value (complete the setting within 5 minutes), wait 2 minutes for pairing; 4) When the SIG1-4 indicator of the slave bridge is always on, it means the pairing is successful. support@ueevii.com...
- Page 8 Note: You can work the wireless bridge without advanced settings 1. Computer Access Wireless Bridge, connect the CPE to the computer Refer to the figure left to connect the CPE to the computer through a PoE adapter and an Ethernet cable. support@ueevii.com...
- Page 9 Connection" to right-click to open the network properties. Refer to the picture above to open. Step 3: Find and double-click open the "Internet Protocol Version 4(TCP/IPv4)", choose the " Use the following IP address" and enter IP address, subnet mask, Default gateway, Preferred DDS server. support@ueevii.com...
-
Page 10: Specifications
Language Setting: English/Chinese can be switched through the icon in the upper right corner Specifications Item Description Brand UeeVii Model CPE-240 Frequency 580MHz DRAM DDR2 128MByte Wireless technology 2.4G:300M 802.11b/g/n MIMO technology 1*10/100Mbps Adaptive Network Interface, Network interface 1*10/100Mbps Adaptive Network Interface, 24V 0.5A non-standard POE power supply,... -
Page 11: Troubleshooting
3. WiFi password is admin. confused with the WEB 2. Re-input the password Wrong Password access password 3. WEB access user namer and password is "admin", Please refer to the WiFi table to find the WiFi password. support@ueevii.com... - Page 12 3. Network virus attack avoid network virus and transmission 4. Too much access users broadcast storm Rate 5. Network Cables type 4. Decrease the access lower than Cat 5e? users. 5. Change use a Cat 5e or above network cable. support@ueevii.com...
-
Page 13: Technical Support And Service
4. Contact us for replacement items Technical Support and Service Thank you for your order and for using UeeVii Wireless Bridge, please read the manual carefully before use. If there are any problems during the use, please contact us in time.
Need help?
Do you have a question about the CPE-240 and is the answer not in the manual?
Questions and answers