Dell OptiPlex VDI Blaster Edition Manual page 10

Specific Instructions for Options 2 and 3 – Writing the Image
from an NFS Mount or Windows Server
1
Enter the base location of the network share and press <Enter>.
For example, if you store your disk image on a Windows network
drive named images located on a server with an IP address of
10.0.5.12, then type: //10.0.5.12/images.
2
Enter a valid username and press <Enter>.
3
Enter the password for this user. Press <Enter> to continue.
4
If you use a Windows Share, then you are prompted to enter the
domain name.
5
Once a connection has been established, a list of available disk
images found on the network drive is displayed.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide | 10