4-14
Dell OptiPlex N Systems Service Manual
Microprocessor/Heat Sink Assembly
microprocessor-socket
release lever
pin-1 corner
of socket
front of computer
Figure 4-13. Microprocessor Removal
To remove the microprocessor/heat sink assembly, follow these steps:
1. Remove the microprocessor securing clip from the microprocessor/heat
sink assembly (see Figure 4-14).
WARNING: The microprocessor chip can get extremely hot during
system operations. Be sure the chip has had sufficient time to cool
before touching it.
Press down on the folded part of the clip with a small screwdriver to release
the clip.
microprocessor securing clip
heat sink
thermal interface pad
(attached to underside
of heat sink)
microprocessor
right tab