1-12
Dell OptiPlex N Systems Service Manual
Table 1-2. System-Board Jumper Descriptions
Jumper
Description
133
Reserved
166
Microprocessor
*
speed
200
Microprocessor
*
speed
233
Microprocessor
*
speed
PSWD
Password
enable or
disable
BIOS
Reserved
*
One set of the speed jumper pins must have a jumper plug installed; otherwise, the computer will
operate at an undetermined speed.
Settings
Do not install jumper.
Install jumper if the microprocessor's
internal speed is 166 MHz; otherwise the
jumper should not be installed.
Install jumper if the microprocessor's
internal speed is 200 MHz; otherwise the
jumper should not be installed.
Install jumper if the microprocessor's
internal speed is 233 MHz; otherwise the
jumper should not be installed.
Install to enable the password features.
Remove the PSWD jumper and boot the
computer to remove an existing password.
Do not install jumper.