Dell OptiPlex G1 Reference And Installation Manual page 90

5-10 Dell OptiPlex G1 Mini Tower Managed PC Reference and Installation Guide

PSWD
(default)

(default)
BIOS
BUS66M
266MHZ
*
300MHZ
*
333MHZ
*
350MHZ
*
400MHZ
*
450MHZ
*
RSVD1
(default)
* One set of the speed jumper pins must have a jumper plug installed; otherwise, the system
will operate at an undetermined speed.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in your
online System User's Guide .
jumpered
Password features are enabled.
Password features are disabled.
Reserved (do not change) .
Reserved (do not change) .
Jumpered when the microprocessor's internal
speed is 266 MHz.
Jumpered when the microprocessor's internal
speed is 300 MHz.
Jumpered when the microprocessor's internal
speed is 333 MHz.
Jumpered when the microprocessor's internal
speed is 350 MHz.
Jumpered when the microprocessor's internal
speed is 400 MHz.
Jumpered when the microprocessor's internal
speed is 450 MHz.
Reserved (do not change).
unjumpered