Dell OptiPlex G1 Reference And Installation Manual page 143

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User's Guide .
The card(s) mentioned
are not fully configured
due to resource conflicts.
If you have documentation that lists the
allowable resource values for your Plug and
Play or PCI expansion card, you can use
the following procedure to locate and
resolve the resource conflict.
NOTE: If you do not have documentation
listing the allowable resource values, see
the corrective action for these messages
on the following page.
Any Plug and Play or PCI expansion
cards that could not be configured
should be marked
list of cards in the ICU window.
The System Resource Usage dialog
box displays all resources currently
used by the system.
The Card Resources Usage dialog box
identifies which device is using the
resource.
See "Modifying a Card" in Chapter 3
for instructions.
ISA Configuration Utility Messages
on the
B-9