Table of Contents
Advertisement
Quick Links
Instruction Manual
Model:
CSX2-M5-EU
CORDLESS PRUNING SAW
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION: Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
v. 1.1
English
Advertisement
Table of Contents
Related Manuals for Senix CSX2-M5-EU
Summary of Contents for Senix CSX2-M5-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU v.
-
Page 2: Table Of Contents
Local Authority or local store for recycling advice. Do not expose to rain. RCM Mark DANGER – Keep hands away from blade. Avoid power lines, use in dry conditions. Keep all bystanders at least 15m (50 ft.) away. EN - 2 SENIX.COM.AU... -
Page 3: Safety Instructions
When operating a power tool outdoors, hazards. use an extension cord suitable for Do not let familiarity gained from outdoor use. Use of a cord suitable for 3 - EN SENIX.COM.AU... - Page 4 WARNING! Slippery handles and grasping surfaces do not allow for safe handling and control of Only use following batteries: B20X2/B25X2/ the tool in unexpected situations. B40X2/B50X2/B60X2/B80X2 and chargers: CHX2/CHQX2/CHQX2-M-EU/CHDX2-M-EU. EN - 4 SENIX.COM.AU...
-
Page 5: Causes And Operator Prevention Of Kickback
As a chainsaw user, you should take several Proper handling of the pruning saw will steps to keep your cutting jobs free from reduce the likelihood of accidental contact 5 - EN SENIX.COM.AU... -
Page 6: Residual Risks
Do not dismantle, open or otherwise not in use. damage cells or battery pack. s. Properly dispose of any damaged or b. Do not short-circuit a battery pack. Do defective batteries according to local not store battery packs haphazardly in regulations. EN - 6 SENIX.COM.AU... -
Page 7: Intended Use
/ saw chain combinations as indicated in the manual. • The user is responsible for any accident resulting from improper use or unauthorized modification of the pruning saw. 7 - EN SENIX.COM.AU... -
Page 8: Know Your Unit
KNOW YOUR UNIT APPLICATIONS Model: CSX2-M5-EU As a pruning saw : Limbing, felling and woodcutting. Guide Bar Oil Tank Chain Chain Guard Side Cover Guide Bar Cover Safety Switch Secondary Grip Area Trigger Chain Tensioning Gear Handle Housing Screw ON/OFF Switch... -
Page 9: Specifications
Unpack all parts and lay them on a flat, stable surface: Remove all packing materials and shipping devices, if applicable. The scope of delivery varies depending on the country and purchased variant. Model of CSX2-M5-EU • Pruning saw x1 • Chain x1 •... -
Page 10: Filling Oil
Clean any debris from the cap area. Twist counterclockwise to remove the oil tank cap. 1/16” - 1/8” (2-3 mm) Fig. 4 Fully tighten the chain tensioning knob clockwise. Fig. 6 EN - 10 SENIX.COM.AU... -
Page 11: Installing/Removing The Battery Pack
Prime the oiler before the first use or after button to stop the tool. being stored for a long time. It is essential to fill with oil before use. Operating the pruning saw without bar and chain oil will result 11 - EN SENIX.COM.AU... -
Page 12: Maintenance
While applying light pressure, guide the saw through the branch from top to bottom. • When sawing off larger branches, first EN - 12 SENIX.COM.AU... - Page 13 Store in a dry place. • Keep out of reach of children or pets. • We recommend using the original package for storage or covering the product with a suitable cloth or enclosure to protect it against dust. 13 - EN SENIX.COM.AU...
-
Page 14: Troubleshooting
Battery pack capacity too Remove and recharge battery pack Product suddenly stops Release the trigger and restart The machine is overloaded the machine Chain and guide bar Check the oil level. Refer to Dry chain overheating "FILLING OIL" EN - 14 SENIX.COM.AU...
Need help?
Do you have a question about the CSX2-M5-EU and is the answer not in the manual?
Questions and answers