Computer Setup-Power; Computer Setup-Boot - Compaq dx2390 Microtower Software Manual

Table 2 Computer Setup—Advanced (continued)
USB Legacy Mode
Support
Onboard LAN
Onboard LAN Boot
ROM
SATA1 Controller
SATA1 Controller
Mode
SATA2 Controller
Onboard Audio
Internal Speaker
Supervisor Password
User Password
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3 Computer Setup—Power
Option
After AC Power Failure Allows you to select system restart behavior after power loss:
XD
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
4 Computer Setup (F10) Utility
Allows you to set:
●
Disabled
●
Enabled
Allows you to disable/enable onboard LAN controller.
Allows you to disable/enable the boot ROM of the onboard LAN chip.
Allows you to disable/enable the SATA1 Controller.
If SATA1 Controller is enabled, allows you to set the mode to:
● IDE
●
AHCI
Allows you to disable/enable the SATA2 Controller.
Allows you to set the onboard audio to:
● Auto
●
Disabled
● Enabled
Allows you to set the internal speaker to:
● Disabled
●
Enabled
Allows you to change supervisor password.
Allows you to change the user password.
Description
●
Stay Off
● Power On
●
Auto
Disables/enables XD bit.
ENWW