Computer Setup-Exit - Compaq dx2390 Microtower Software Manual
Compaq business pc computer setup (f10) utility guide
Hide thumbs
Also See for Compaq dx2390 Microtower:
- Service & reference manual (104 pages) ,
- Hardware reference manual (57 pages) ,
- Utility manual (12 pages)
Table of Contents
Advertisement
Table 4
Computer Setup—Boot
Option
Boot-time Diagnostic
Screen
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Floppy Group Boot
Priority
CD-ROM Group Boot
Priority
Hard Drive Group Boot
Priority
Network Group Boot
Priority
Computer Setup—Exit
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5
Computer Setup—Exit
Option
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Save Changes
ENWW
Description
Disables/enables POST diagnostic messages display.
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●
Floppy Group
●
CD-ROM Group
●
Hard Drive Group
●
Network Boot Group
NOTE:
MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Specifies boot device priority within removable devices.
Specifies boot device priority within CD/DVD drives.
Specifies boot device priority within hard drives.
Specifies boot device priority within bootable network devices.
Description
Press
Enter
to exit saving changes.
Press
Enter
to exit discarding changes.
Press
Enter
to load setup defaults.
Press
Enter
to discard changes.
Press
Enter
to save changes.
Computer Setup (F10) Utilities
5
Advertisement
Table of Contents
