Table of Contents
Advertisement
Table 2
Computer Setup—Advanced (continued)
SATA1 Controller
Mode
Onboard Audio
Onboard LAN
Onboard LAN Boot
ROM
USB Ports
Hood Sensor
IO Device
Configuration
Computer Setup—Power
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3
Computer Setup—Power
Option
After AC Power Failure Allows you to select system restart behavior after power loss:
XD
Virtualization
Technology
Computer Setup—Boot
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 4
Computer Setup—Boot
Option
4
Computer Setup (F10) Utility
If SATA1 Controller is enabled, allows you to set the mode to:
●
IDE
●
RAID
●
AHCI
Allows you to set the onboard audio to:
●
Enabled
●
Disabled
●
Auto
Allows you to disable/enable onboard LAN controller.
Allows you to disable/enable the boot ROM of the onboard LAN chip.
Allows you to disable/enable USB ports.
●
Disabled
●
Enabled
Allows you to disable/enable the hood sensor warning beep.
Allows you to change the Super IO device resource.
Description
●
Stay Off
●
Power On
●
Auto
Disables/enables XD bit.
Allows you to disable/enable Virtualization Technology.
Description
ENWW
Advertisement
Table of Contents
