Rear Panel Components
Figure 1-4
Table 1-3
Rear Panel Components
1
Power Cord Connector
2
Voltage Select Switch
3
PS/2 Keyboard Connector (purple)
4
Serial Port (teal)
5
VGA Monitor Connector (blue)
6
Universal Serial Bus (USB)
7
Microphone Connector (pink)
NOTE:
Arrangement and number of connectors may vary by model.
The monitor connector on the system board is inactive when a PCI Express x16 graphics card is installed
in the computer.
If a PCI or PCI Express x1 graphics card is installed, the connectors on the card and the system board
may be used at the same time. Some settings may need to be changed in Computer Setup to use both
connectors. For information about setting the boot VGA controller, refer to the Computer Setup (F10)
Utility Guide.
The Line-In, Line-Out, and Microphone audio connectors on the rear panel can be reconfigured to
perform different audio functions using the Realtek Audio Manager. To access the Realtek Audio
Manager, click the Realtek Audio icon on the Windows taskbar, then select the Speaker Configuration
tab to reconfigure the audio connectors.
The following table describes the audio configuration options available in the Realtek Audio Manager.
4
Chapter 1 Product Features
Rear Panel Components
8
Line-Out Connector for powered audio
devices (green)
9
Line-In Audio Connector (blue)
10
PS/2 Mouse Connector (green)
11
Parallel Port (purple)
12
RJ-45 Network Connector
13
Optional Serial Port (teal)
ENWW