Table of Contents
Advertisement
Table A-1 Summary of SRM Console Commands (continued)
Command
more
prcache
set envar
set host
set password
set secure
show envar
show config
show cpu
show device
show ide
show memory
show pal
show power
show version
stop
test
Displays a file one screen at a time.
Utility that initializes and displays status of the
optional PCI NVRAM device.
Sets or modifies the value of an environment
variable.
Connects to an MSCP DUP server on a DSSI device.
Sets the console password for the first time or
changes an existing password.
Enables secure mode without requiring a restart of
the console.
Displays the state of the specified environment
variable.
Displays the configuration at the last system
initialization.
Displays the state of each processor in the system.
Displays a list of controllers and their devices in the
system.
Displays the internal register setup for the primary
and secondary IDE controllers.
Displays memory module information.
Displays the version of the privileged architecture
library code (PALcode).
Displays information about the power supply, system
and PCI fans, CPU fan, and temperature.
Displays the version of the console program.
Halts the processor. (Same as halt.)
Runs firmware diagnostics for the system.
Function
SRM Console A-5
Advertisement
Table of Contents
