Msa Support For Sco Operating Systems - Supported Components; Hardware - Compaq DL760 - ProLiant - 1 GB RAM Manual

MSA support for SCO Operating Systems – Supported
Components

Hardware

The hardware listed below is supported with MSA1000 and MSA1500 on SCO UnixWare and
OpenServer operating system unless noted.
Please check the HP products and services ProLiant Server OS Support Matrix
SCO Operating systems and the Server QuickSpecs for MSA1000 / MSA1500 support.
Host Bus Adapter
1. HP StorageWorks FCA2214 (P/N: 283384-001)
2. HP StorageWorks FCA2214DC (P/N: 321835-B21)
FCA2214/FCA2214DC is 2-Gbps Fibre Channel to
PCI-X Host Bus Adapter that provides operating system
connectivity support for the HP StorageWorks storage
array family.
HBA is branded and marketed under different names.
Use the latest BIOS for HBA available at www.hp.com.
NOTE: hp ProLiant Servers recognize FCA2214 and
FCA2214DC controllers in the following way:
a. At POST: "QLA2312 PCI Fibre Channel"
b. In RBSU: "QLogic 2340/2342, 64Bit/133MHz
PCI-X to FC 2GB HBA"
Storage
1. HP StorageWorks Modular Smart Array 1500 cs
(P/N: AA986A)
Single Controller (Active/Passive) :
Firmware Version: 4.96b or higher
Dual Controller (Active/Active):
Firmware Version: 6.86 or higher
2. HP StorageWorks Modular Smart Array 1000
(P/N: 201723-B22)
Firmware Version: 4.94 or higher
3. HP StorageWorks Modular Smart Array 20 (P/N:
335921-B21)
Firmware Version: 1.28 or higher
4. HP StorageWorks Modular Smart Array 30 (P/N:
302969-B21)
Firmware Version: CP20 or higher
ProLiant Servers
for more detailed server support information for
qlc2300 – Qlogic QLC2300 Fibre Channel HBA Driver
Use the driver available on the OS media or download
the latest version from
http://www.sco.com/support/download.html
Connectivity requirements
1. HP MSA SAN Switch 2/8 (P/N: 288247-B21)
2. HP MSA Hub 2/3 (P/N: 286763-B21)
3. StorageWorks Fibre channel Storage Hub 12
(P/N: 295573-001
4. Brocade Silkworm 2040 SAN switch
Host Bus Driver
8