Taurus RCMB22 Instructions For Use Manual page 15

• Use Increase or decrease buttons to set the minutes.
• Press timer function button to confirm.
MODES AND PRESET PROGRAMS
• Press the Mode selector button to enter the mode
selection. When pressed, the heating mode runs in a
continuous cycle as shown below:
• Comfort mode: Press increase and decrease button to set
the temperature from 5-35°C.
• ECO mode: Press increase and decrease button to set
the temperature from 1-31°C.
Note: ECO mode = Comfort mode - 4°C
• Anti-frost mode: the screen displays "Fr". The target
temperature is 7°C. The temperature can't be adjusted.
• P1/P2/P3: Preset heating programme.
Note: If the clock and day setting has not finished, the first
time you enter the P1/P2/P3 program setting, it will be
prompted to set the day and clock in advance.
P1: (Monday-Sunday) Program can't be set
P2: (Monday-Friday) Program can't be set
P2: (Saturday-Sunday) Program can't be set
P3: (Monday-Friday) Adjustable program
P3: (Saturday-Sunday) Adjustable program
P3 Adjustable program setting
- If you've selected programme P3, you can change its
programming by pressing the mode selector button
(7)(a) for more than 3 seconds to enter the day setting.
- The screen displays "d1". Press increase or decrease
button to set the day between d1-d7 (Monday-
Sunday).
- Press mode button to confirm and enter hour setting.
- The screen displays "00". Press increase and
decrease button to set from (00-23h).
- Press Mode Button to choose heating mode for every
hour (Comfort mode, ECO mode or anti-frost mode).
- Repeat the operation until you have completed the
schedule of every hour and every day.
TIMER FUNCTION
• Press Timer function button once, "0h" will flash in the
display.
• Press and hold the timer function button to select between
preset time periods, or press the increase and decrease
buttons to set the timer from 0-9 hours.
OSCILLATION FUNCTION
• The oscillation function makes it possible to direct the flow
from the apparatus.
• To activate this function, press the (c) button.
• To deactivate this function press the (c) button again.
OPEN WINDOW FUNCTION
• To activate this function, press the Function Mode button
and the Increase button together.
• The screen will show "F0", after 3 seconds, the screen will
show the set temperature or timer, if set.
• Once the product detects a rapid drop in room
temperature in a certain period, "F0" will flash on the
screen and the appliance will stop heating.
• To return to the working mode, press Mode function
button, then screen will stop flashing "F0". If no operation
is performed during 60 minutes the appliance will
automatically come back to previous working mode.
Note: The open window function would be reset when the
item is turned on again.
• To deactivate this function, press together Mode function
button and decrease button. The screen will display
"FF", after 3 seconds, the screen will display the set
temperature.