Download Print this page
Polygroup Ashland TG40DY281C05 Assembly Instructions
Polygroup Ashland TG40DY281C05 Assembly Instructions

Polygroup Ashland TG40DY281C05 Assembly Instructions

Advertisement

Quick Links

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below
on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting
into the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of
branch hinges.
7. (For pre-lit trees only) Connect the plug(s) securely as per the color labels indicated in Fig. B and insert the green label
extension cord plug into the wall outlet. Your entire tree should now be lit. If some bulbs do not light or flickers, search for
any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the performance and
life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan
out one to the right, one to the left and one at the center of the main stem. (See Fig. C)
Fig. C
Top view
MODEL #: TG40DY281C05
1-888-919-0070
OR
Tree top
Side view
Insert and slide the legs
upward into the slots of the
base until firmly secured.
*Electrical Rating For The Tree
(For Indoor Use Only)
0.36A 120V 60Hz
Assemble
Red Labels
Together
Insert
Green Label
Plug Into Wall
Outlet
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ashland TG40DY281C05 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Polygroup Ashland TG40DY281C05

  • Page 1 1-888-919-0070 TREE ASSEMBLY INSTRUCTIONS Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below on how to quickly and easily set up your new tree. 1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
  • Page 2 9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated. STORAGE INSTRUCTIONS 1. Remove all ornaments and decorations. For pre-lit trees, first unplug extension cord from the wall outlet and then disconnect light extension cord between each section of the tree.