Polygroup TG46M6159C00 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
Carefully follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Tree Bottom
3. Assemble the tree from the bottom to the top. Insert the pole of the tree top into Tree Bottom until
firmly secured. Be sure that all wires are free of branch hinges.
4. Connect the red label plugs, and then insert green label plug into the wall outlet (Fig. B). Your entire
tree should now be lit.
5. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out in a
star shape (Fig. C), and continue until the entire tree is shaped.
Fig. C
Top view
6. Slightly upsweep all tips for a fuller, uniform look. Shift branches to fill in any gaps. Your Christmas tree
is now complete and ready to be decorated.
MODEL #: TG46M6159C00
Polygroup®!
Tree Top
Side view
2019 TREE LETTER "A"
Sku # 5064431
Slide the legs up into the slots
of the base on the trunk on
the Bottom Section until
firmly secured.
*Electrical Rating For The Tree
(For Indoor Use Only)
0.68A 120V, 60Hz
Connect Red
Label Plugs
Insert
Green Label
Plug Into Wall
Outlet