Polygroup TG4600EHFC00 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
3. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and insert it into the assembled stand.
Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of
branch hinges.
7. Connect the light strings as per the color labels indicated in Fig. B and insert green label plug into the wall outlet. Your
entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or
missing bulbs. Replace bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
MODEL #: TG4600EHFC00 SKU: 200-509
TG4600EHFM00 SKU: 200-592
1-888-919-0070
OR
Polygroup®!
Tree top
Section 1
Carefully follow the instructions below on how to quickly
*Electrical Rating For The Tree
(For Indoor Use Only)
0.85A 120V 60Hz
Assemble
Red Labels
Together
Green Label
Plug Into Wall
1
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
Insert
Outlet