Polygroup TG40DY281C02 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
easily set up your new tree.
1. Befor e you start to assemble your tree, choose an appropriate location near a wall outlet.
ssemble the tree stand and place on a level surface. (See Fig. A)
2. A
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
3. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top.Start with the bottom section and insert it into the assembled stand.Make
sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of
branch hinges.
7. (For pre-lit trees only) Connect the light strings as per the color labels indicated in Fig. B and insert green label plug into
the wall outlet.Your entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or
broken,loose or missing bulbs. Connecting the plugs or replace the bad bulbs promptly in order to maintain the performance
and life expectancy of your pre-lit tree.
MODEL #: TG40DY281C02
1-888-919-0070
OR
Polygroup®!
Tree Top
Section 1
Carefully follow the instructions below on how to quickly and
Assemble
Red Labels
Together
1
Insert and slide the legs
upward into the slots of the
base until firmly secured.
*Electrical Rating For The Tree
(For Indoor Use Only)
0.36A 120V 60Hz
Insert
Green Label
Plug Into Wall
Outlet