Related Manuals for ALVEO3D ALVEOPRO2-M100
Summary of Contents for ALVEO3D ALVEOPRO2-M100
- Page 1 INSTRUCTIONS MANUAL ALVEO3D UPDATE ALVEOPRO2 ALVEOPRO - M100 Filtering system for 3D printer - HEPA14 & active carbon Find all assembly resources www.alveo3d.com/en/assembly-alveopro/ and download contents www.alveo3d.com/en/download-alveopro/ v1.0 EN...
- Page 2 POSITION OF THE ELECTRICAL SUPPLY Connect the electrical supply directly to the electronic board. Use the anti-para- site guide and cable ties to facilitate the management of the power supply cable. Identify the locations for the cable ties and the guide. Locations for cable ties Anti-parasite guide...
- Page 3 AIR EXTRACTION SETUP Replace the safety grille at the back of the AlveoPRO2 with the cylindrical connector with the flat edge. Position this connector so that the flat edge is facing down, then screw in the semi-rigid tube to manage the air extraction. Remove the protective grille.
- Page 4 USB C connector Back button LED light indication of the device's status ON/OFF switch CUSTOMER / TECHNICAL / COMMERCIAL SUPPORT : + 33 978 809 394 ALVEO3D by FLEXEE SYSTEM SAS 460 Rue de la Leysee 73000 Chambéry www.alveo3d.com contact@alveo3d.com...
Need help?
Do you have a question about the ALVEOPRO2-M100 and is the answer not in the manual?
Questions and answers