Black Box LGC5300 Series Manual
  1. Manuals
  2. Brands
  3. Black Box Manuals
  4. Media Converter
  5. LGC5300 Series
  6. Manual
Black Box LGC5300 Series Manual

Black Box LGC5300 Series Manual

Convert 10/100/1000base-t utp to 1000base-x or 100base-fx fiber and provide power-over-ethernet (poe+)
Hide thumbs

Advertisement

Table of Contents

Industrial Gigabit PoE/PoE+ Media Converter
Convert 10/100/1000BASE-T UTP to 1000BASE-X or
100BASE-FX fiber and provide Power-over-Ethernet (PoE+).
Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ standards.
Configurable PoE power reset.
Customer
Support Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
PA 15055-1018 • Web site: www.blackbox.com • E-mail: info@blackbox.com
LGC5310A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LGC5300 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Black Box LGC5300 Series

Summary of Contents for Black Box LGC5300 Series

  • Page 1 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Support Information FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 • Web site: www.blackbox.com • E-mail: info@blackbox.com...
  • Page 2 Industrial Gigabit PoE/PoE+ Media Converter FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference...

  • Page 3: Nom Statement

    NOM Statement 5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.. 6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.
  • Page 4 Industrial Gigabit PoE/PoE+ Media Converter 17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación. 18. Servicio por personal calificado deberá ser provisto cuando: A: El cable de poder o el contacto ha sido dañado; u B: Objectos han caído o líquido ha sido derramado dentro del aparato; o C: El aparato ha sido expuesto a la lluvia;...
  • Page 5 Trademarks Used in this Manual TRADEMARKS USED IN THIS MANUAL Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

  • Page 6: Installation Procedure

    Industrial Gigabit PoE/PoE+ Media Converter This User Manual describes the functions of the Industrial Gigabit PoE/PoE+ Media Converter. Product Overview The Industrial Gigabit PoE/PoE+ media converter provides 10/100/1000BASE-T UTP to 1000BASE-X or 100BASE-FX fiber conversion and function as Power-over- Ethernet (PoE) Power Sourcing Equipment (PSE). Industrial Gigabit PoE/PoE+ Media Converter.

  • Page 7: Dip-Switch Descriptions

    DIP-switch Descriptions DIP-switch Bank Locations The table below provides a description of each DIP-switch position and function. Switch 1 Fiber, 1 UTP Port 1 Fiber Speed Port 2 UTP AUTO/MAN Port 2 UTP Speed (Only in MAN mode) Port 2 UTP Duplex (Only in MAN mode) Pause Capability UTP Port 2 PoE/PSE...
  • Page 8 Industrial Gigabit PoE/PoE+ Media Converter SFPs. Setting these DIP-switches to the Down “1000” position enables the fiber port to accept 1000BASE-X SFPs. Setting these DIP-switches to the Up “100” position enables the fiber port to accept 100BASE-FX SFPs. SW3, SW4 and SW5 UTP Configuration DIP-Switches UTP Mode of Operation AN/Man 100/10...
  • Page 9 Power Sourcing Options and Link Modes SW9, SW10 and SW11 - Power Sourcing Options The UTP ports can be configured to support different powering options. The powering options include Alternative A (supporting power on pins 1,2 and 3,6), Alternative B (supporting power on pins 4,5 and 7,8), legacy Power Devices (PDs) that use large capacitance for detection (supporting pins 4,5 and 7,8) and legacy VoIP phones (supporting reverse polarity on pins 4,5 and 7,8).
  • Page 10 Industrial Gigabit PoE/PoE+ Media Converter NOTE: Alternative A and Alternative B pinouts are compliant with IEEE802.3af and IEEE802.3at specifications. Power is applied to center tap of transformers for both Alternative A and Alternative B pinouts per IEEE802.3at. Power is applied to center tap of transformers for Legacy VoIP pinout, but polarity is reversed.

  • Page 11: Applying Power

    Applying Power 2) Apply DC Power Power source should be available within 5 ft. of the chassis. The over current protection for connection with centralized DC shall be provided in the building installation, and shall be a UL listed circuit breaker rated 20 Amps, and installed per the National Electrical Code, ANSI/NFPA-70.
  • Page 12 Industrial Gigabit PoE/PoE+ Media Converter Connect the power wires to the circuit breaker and switch the circuit breaker ON. If any modules are installed, their Power LED should indicate the presence of power. Installation of the equipment should be such that the air flow in the front, back, side and top vents of the chassis are not compromised or restricted.

  • Page 13: Connecting Cables

    Connecting Cables 3) Connect Cables When using the SFP model, insert the SFP Fiber transceiver into the SFP receptacle on the front of the module. NOTE: The release latch of the SFP Fiber transceiver must be in the closed (up) position before insertion. Connect an appropriate multimode or single-mode fiber cable to the fiber port on the front of the module.
  • Page 14 Industrial Gigabit PoE/PoE+ Media Converter 4) Verify Operation Industrial Gigabit PoE/PoE+ Media Converter Verify the is operational by viewing the LED indicators. Power LED Indicators Legend Indicator Description Unit not powered Green - ON Unit powered Amber - ON Over temperature condition Power LED Indicators Fiber Port LED Indicators Legend...
  • Page 15 Power and LED Indicators UTP Port Indicators Legend Indicator Description No link Green - ON Port linked at 100Mbps Green - Blinking at 10Hz Port data activity at 100Mbps No link 1000 Green - ON Port linked at 1000Mbps Green - Blinking at 10Hz Port data activity at 1000Mbps No link Green - ON...

  • Page 16: Specifications

    Industrial Gigabit PoE/PoE+ Media Converter Industrial Gigabit PoE/PoE+ Media Converter Model Type Standard (PoE) IEEE 802.3at Max PoE Power 34.2W (per UTP port) Protocols (Ethernet) Fiber: 100BASE-FX, 1000BASE-X UTP Copper: 10/100/1000BASE-T Copper Connectors RJ-45 Fiber Connectors SFP: AC Power requirements 100 to 240VAC / 50 to 60HZ (typical) 460mA@120VAC...

  • Page 17: Appendix A: Link Modes

    Link Modes Appendix A: Link Modes Page 17 724-746-5500 | blackbox.com...
  • Page 18 Industrial Gigabit PoE/PoE+ Media Converter Page 18 724-746-5500 | blackbox.com...
  • Page 19 Page 19 724-746-5500 | blackbox.com...
  • Page 20 Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Call 724-746-5500 or visit blackbox.com. Copyright 2014, 2024. All rights reserved. © EN_NET_Manual_LGC5310A_Rev1_2410 724-746-5500 | blackbox.com...

This manual is also suitable for:

Lgc5310a

Table of Contents