Adding Or Replacing The Memory Card Reader - HP CQ5110F - Presario - 3 GB RAM Upgrade And Service Manual

16
Upgrading and Servicing Guide

Adding or replacing the memory card reader

1 Complete the procedures to remove the memory card reader, if necessary. See
"Removing the memory card reader" on page 15.
2 Slide the memory card reader partway into the front of the chassis.
3 Attach the cables to the back of the memory card reader.
4 Push the memory card reader into the chassis until the screw hole on the chassis is
aligned with the screw hole on the top of the memory card reader, and then insert the
short screw to secure the memory card reader to the chassis.
5 Replace the front and side panels, and close the computer. See "Opening and Closing
the Computer" on page 1.