HP CQ5110F - Presario - 3 GB RAM Upgrade And Service Manual page 22

18
Upgrading and Servicing Guide
5 Lift the hard disk drive cage out of the chassis, and then remove the hard disk drive
cables.
For most drive cables, use a gentle rocking motion to remove the plug.
For Serial ATA hard disk drive cables, press the latch (A) (select models only) in
the center of each plug (B), and then pull the plug out of the drive connector.
6 Remove the four screws that secure the hard disk drive to the hard disk drive cage,
and then slide the hard disk drive out of the hard disk drive cage.